Underfloor heating in Yarm

Postcode districts: TS15, TS16, TS17
Nearby: Thornaby-on-Tees, Stockton-on-Tees and Billingham
Guide price: £650–£2,200
Typical time on site: 1–2 working days (added to a fit)
Water: Moderately hard across most of County Durham
Survey: Free, at your home

What does bathroom underfloor heating cost in Yarm?

As a guide, budget £650 to £2,200 including VAT for bathroom underfloor heating in Yarm; your written quote will pin it down. Labour costs in North East England put local prices at about 10% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£650–£1,350

Mat under the tiles

Electric, larger room

£1,100–£2,000

Programmable smart thermostat

Wet system

£1,350–£2,700

Screed or low-profile boards

Guide prices for Yarm including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Yarm

In Yarm we cover TS15, TS16 and TS17; we also cover Thornaby-on-Tees, 3.1 miles away, and Stockton-on-Tees.

Yarm gets the same process as anywhere else: a free survey at your home and a written, itemised quote. We check door thresholds in Yarm homes at the survey, because underfloor heating and new tiles raise the floor slightly. Where a Yarm home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric.

Supplies across most of County Durham are moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
Bringing the system up to temperature gradually once the adhesive and grout have cured
A check of the floor construction, the room's heat loss and where the thermostat and supply will go

Decisions to make first

Insulation board thickness

Thicker boards warm up faster and lose less heat downwards, but raise the floor; the right choice depends on the door threshold and the next room.

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Yarm: questions

How much should I budget for bathroom underfloor heating in Yarm?

Bathroom underfloor heating in Yarm usually costs £650–£2,200 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the home survey in Yarm really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover TS15 in Yarm?

Yes. We cover all of Yarm, including TS15, TS16 and TS17, and nearby Thornaby-on-Tees, Stockton-on-Tees and Billingham. Survey visits are free and arranged at a time that suits you.

Is the water hard in Yarm?

Can underfloor heating go under a bath or shower tray?

No. Electric underfloor heating must not be laid under baths, shower trays, WCs or fixed furniture, because trapped heat can damage the cable and the item above it. It covers the open floor you stand on, and in a wet room it can run under the tiled shower area.