Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
County Durham · TS23

Underfloor heating in Billingham

We handle underfloor heating for homeowners and landlords in Billingham, with the survey, products, strip-out, trades and fitting under one contract.

£650–£2,200 inc VAT1–2 working days (added to a fit)Free home survey
Electric underfloor heating mat laid before tiling, example for Billingham
Postcode districts
TS23
Nearby
Stockton-on-Tees, Middlesbrough and Thornaby-on-Tees
Guide price
£650–£2,200
Typical time on site
1–2 working days (added to a fit)
Water
Moderately hard across most of County Durham
Survey
Free, at your home

What does bathroom underfloor heating cost in Billingham?

In Billingham, bathroom underfloor heating typically costs £650–£2,200 including VAT, based on North East England prices. We adjust the national guide for North East England, where prices are typically about 10% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Electric, larger room

£1,100–£2,000
  • Electrician sign-off

Wet system

£1,350–£2,700
  • Pipes linked to the heating

Guide prices for Billingham including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Billingham

We work right across Billingham — TS23 — and in neighbouring Stockton-on-Tees and Middlesbrough.

Homes in and around Billingham vary, so we look at the floor, the walls and the water system before we price anything. Whether your Billingham bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room. Where a Billingham home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric.

Water across much of County Durham is moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
  • A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
  • The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
  • A check of the floor construction, the room's heat loss and where the thermostat and supply will go

Decisions to make first

Floor heating and towel rail

Underfloor heating warms the room; a towel rail dries towels. Many bathrooms have both, and a dual-fuel rail keeps working in summer when the boiler is off.

Insulation board thickness

Thicker boards warm up faster and lose less heat downwards, but raise the floor; the right choice depends on the door threshold and the next room.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Billingham: questions

What is the price of bathroom underfloor heating in Billingham?

Bathroom underfloor heating in Billingham usually costs £650–£2,200 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Do you cover TS23 in Billingham?

Yes. We cover all of Billingham, including TS23, and nearby Stockton-on-Tees, Middlesbrough and Thornaby-on-Tees. Survey visits are free and arranged at a time that suits you.

Is the water hard in Billingham?

Water across much of County Durham is moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for bathroom underfloor heating in Billingham?

Building control for Billingham is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Do I need an electrician to install bathroom underfloor heating?

Yes, for the connection. The fitter can lay the mat, but the supply, RCD protection and thermostat in a bathroom must be installed and tested by a qualified electrician, and in England and Wales the work is notifiable under Part P. Our underfloor heating guide covers the choices in more depth.

Underfloor heating in Billingham

Book a free home survey in Billingham. You get a measured layout and an itemised written price before anything is ordered.