Underfloor heating in Cookstown

Postcode districts: BT80
Nearby: Magherafelt, Dungannon and Portadown
Guide price: £600–£2,200
Typical time on site: 1–2 working days (added to a fit)
Water: Soft across most of County Tyrone
Survey: Free, at your home

What does bathroom underfloor heating cost in Cookstown?

Guide price in Cookstown: £600–£2,200 including VAT, depending on the room and what you choose. We adjust the national guide for Northern Ireland, where prices are typically about 12% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£600–£1,300

Mat under the tiles

Electric, larger room

£1,050–£1,950

Programmable smart thermostat

Wet system

£1,300–£2,600

Screed or low-profile boards

Guide prices for Cookstown including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Cookstown

As well as Cookstown itself (BT80), we survey in Magherafelt, Dungannon and Portadown.

Being a smaller town does not change how we work in Cookstown: free survey, written quote, one team. Whether your Cookstown bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room. Where a Cookstown home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric.

Most of County Tyrone is supplied with soft water. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

Bringing the system up to temperature gradually once the adhesive and grout have cured
Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician

Decisions to make first

Thermostat

A simple dial thermostat, a programmable one with set times, or a smart thermostat you can control from your phone.

Floor finish

Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.

Rules that apply in Northern Ireland

Northern Ireland has no Part P, but the heating circuit should be designed, tested and certified to BS 7671, with RCD protection. Building control is not usually involved unless drainage or structural work is being done alongside it.

More about underfloor heating

Underfloor heating in Cookstown: questions

How much should I budget for bathroom underfloor heating in Cookstown?

Bathroom underfloor heating in Cookstown usually costs £600–£2,200 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Is the home survey in Cookstown really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover BT80 in Cookstown?

Yes. We cover all of Cookstown, including BT80, and nearby Magherafelt, Dungannon and Portadown. Survey visits are free and arranged at a time that suits you.

Is the water hard in Cookstown?

Is underfloor heating enough to heat a bathroom on its own?

In a well-insulated bathroom with most of the floor open, it often is. In a small room, the bath, WC and furniture cover much of the floor, so the heated area may be too small to be the only heat source. A heated towel rail alongside is the usual answer.