- Postcode districts
- TQ12
- Nearby
- Torquay, Paignton and Brixham
- Guide price
- £700–£2,600
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Soft across most of Devon
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Newton Abbot?
For Newton Abbot, our guide range for bathroom underfloor heating is £700 to £2,600 including VAT. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Thermostat and RCD-protected supply
Electric, larger room
- Whole floor coverage
Wet system
- Manifold or single-zone kit
Guide prices for Newton Abbot including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Newton Abbot
In Newton Abbot we cover TQ12; we also cover Torquay, 6 miles away, and Paignton.
In Newton Abbot, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Newton Abbot home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below. Whether your Newton Abbot bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room.
Supplies across most of Devon are soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
- A floor sensor set between the heating runs and wired back to the thermostat
- Bringing the system up to temperature gradually once the adhesive and grout have cured
- Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
Decisions to make first
Floor finish
Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.
Electric or wet
Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.
Rules that apply in England
In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

