Underfloor heating in Wigan

Postcode districts: WN1, WN3, WN5
Nearby: Westhoughton, Golborne and Horwich
Guide price: £650–£2,400
Typical time on site: 1–2 working days (added to a fit)
Water: Soft across most of Greater Manchester
Survey: Free, at your home

What does bathroom underfloor heating cost in Wigan?

As a guide, budget £650 to £2,400 including VAT for bathroom underfloor heating in Wigan; your written quote will pin it down. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£650–£1,400

Thermostat and RCD-protected supply

Electric, larger room

£1,150–£2,100

Whole floor coverage

Wet system

£1,400–£2,800

Manifold or single-zone kit

Guide prices for Wigan including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Wigan

We work right across Wigan — WN1, WN3 and WN5 — and in neighbouring Westhoughton and Golborne.

Across a large town like Wigan, homes range from older terraces to newer estates; the survey tells us which pipework and floor we are dealing with. If your Wigan home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below. We check door thresholds in Wigan homes at the survey, because underfloor heating and new tiles raise the floor slightly.

Water across much of Greater Manchester is soft. Soft water is kind to grout, so mid-tone and darker grouts stay looking fresh. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
A check of the floor construction, the room's heat loss and where the thermostat and supply will go
Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded

Decisions to make first

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Mat or loose cable

Mats are quickest on square, open floors. Loose cable is easier to route around awkward shapes, pipe boxing and a curved shower area.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Wigan: questions

How much does bathroom underfloor heating cost in Wigan?

Bathroom underfloor heating in Wigan usually costs £650–£2,400 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Is the water hard in Wigan?

Who handles building control for bathroom underfloor heating in Wigan?

Building control for Wigan is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does bathroom underfloor heating take?

Allow 1–2 working days (added to a fit) on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Wigan.

Does underfloor heating raise the floor height?

Yes, a little. An electric mat on an insulation board usually adds roughly 10 mm before the adhesive and tile, which matters at the door threshold. Wet systems in low-profile boards add more, and screeded systems more again.