Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Hampshire · GU14

Underfloor heating in Farnborough

Underfloor heating in Farnborough, planned from measurements taken in your home and priced in writing. We cover GU14 and the surrounding area.

£800–£2,800 inc VAT1–2 working days (added to a fit)Free home survey
Electric underfloor heating mat laid before tiling, example for Farnborough
Postcode districts
GU14
Nearby
Camberley, Aldershot and Fleet
Guide price
£800–£2,800
Typical time on site
1–2 working days (added to a fit)
Water
Hard across most of Hampshire
Survey
Free, at your home

What does bathroom underfloor heating cost in Farnborough?

Our guide price for bathroom underfloor heating in Farnborough is £800–£2,800 including VAT. We adjust the national guide for South East England, where prices are typically about 12% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Electric, larger room

£1,350–£2,500
  • Programmable smart thermostat

Wet system

£1,700–£3,400
  • Screed or low-profile boards

Guide prices for Farnborough including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Farnborough

As well as Farnborough itself (GU14), we survey in Camberley, Aldershot and Fleet.

In Farnborough, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. Where a Farnborough home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric. For Farnborough homes having the bathroom floor replaced, underfloor heating adds one to two days to the fit.

Water across much of Hampshire is hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
  • A check of the floor construction, the room's heat loss and where the thermostat and supply will go
  • A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
  • The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit

Decisions to make first

Mat or loose cable

Mats are quickest on square, open floors. Loose cable is easier to route around awkward shapes, pipe boxing and a curved shower area.

Thermostat

A simple dial thermostat, a programmable one with set times, or a smart thermostat you can control from your phone.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Farnborough: questions

How much should I budget for bathroom underfloor heating in Farnborough?

Bathroom underfloor heating in Farnborough usually costs £800–£2,800 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover GU14 in Farnborough?

Yes. We cover all of Farnborough, including GU14, and nearby Camberley, Aldershot and Fleet. Survey visits are free and arranged at a time that suits you.

Is the water hard in Farnborough?

Water across much of Hampshire is hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for bathroom underfloor heating in Farnborough?

Building control for Farnborough is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Do I need an electrician to install bathroom underfloor heating?

Yes, for the connection. The fitter can lay the mat, but the supply, RCD protection and thermostat in a bathroom must be installed and tested by a qualified electrician, and in England and Wales the work is notifiable under Part P. Our underfloor heating guide covers the choices in more depth.

Underfloor heating in Farnborough

Book a free home survey in Farnborough. You get a measured layout and an itemised written price before anything is ordered.