- Postcode districts
- SO40
- Nearby
- Southampton, Romsey and Hythe
- Guide price
- £800–£2,800
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Hard across most of Hampshire
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Totton?
Guide price in Totton: £800–£2,800 including VAT, depending on the room and what you choose. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Mat under the tiles
Electric, larger room
- Programmable smart thermostat
Wet system
- Screed or low-profile boards
Guide prices for Totton including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Totton
We cover every part of Totton, including SO40, and nearby Southampton (3.9 miles) and Romsey (4.9 miles).
Homes in and around Totton vary, so we look at the floor, the walls and the water system before we price anything. If your Totton bathroom has a cold tiled floor and no room for a bigger radiator, an electric mat under new tiles is the simplest answer. Whether your Totton bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room.
Supplies across most of Hampshire are hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
- A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
- A check of the floor construction, the room's heat loss and where the thermostat and supply will go
- For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
Decisions to make first
Floor finish
Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.
Electric or wet
Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.
Rules that apply in England
In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.
