- Postcode districts
- TN23, TN24
- Nearby
- Faversham, Canterbury and Folkestone
- Guide price
- £800–£2,800
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Very hard across most of Kent
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Ashford?
As a guide, budget £800 to £2,800 including VAT for bathroom underfloor heating in Ashford; your written quote will pin it down. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Thermostat and RCD-protected supply
Electric, larger room
- Whole floor coverage
Wet system
- Manifold or single-zone kit
Guide prices for Ashford including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Ashford
In Ashford we cover TN23 and TN24; we also cover Faversham, 11.6 miles away, and Canterbury.
Homes in and around Ashford vary, so we look at the floor, the walls and the water system before we price anything. If your Ashford home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below. Where a Ashford home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric.
Supplies across most of Kent are very hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
- Bringing the system up to temperature gradually once the adhesive and grout have cured
- A check of the floor construction, the room's heat loss and where the thermostat and supply will go
- Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded
Decisions to make first
Floor finish
Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.
Insulation board thickness
Thicker boards warm up faster and lose less heat downwards, but raise the floor; the right choice depends on the door threshold and the next room.
Rules that apply in England
In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.
