Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Kent · DA3

Underfloor heating in Longfield

If you are planning bathroom underfloor heating in Longfield, the first step is a free survey visit: we measure, check your pipework and electrics, and give you a written quote.

£800–£2,800 inc VAT1–2 working days (added to a fit)Free home survey
Electric underfloor heating mat laid before tiling, example for Longfield
Postcode districts
DA3, DA4, DA13
Nearby
Hartley, Swanscombe and Gravesend
Guide price
£800–£2,800
Typical time on site
1–2 working days (added to a fit)
Water
Very hard across most of Kent
Survey
Free, at your home

What does bathroom underfloor heating cost in Longfield?

As a guide, budget £800 to £2,800 including VAT for bathroom underfloor heating in Longfield; your written quote will pin it down. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Electric, larger room

£1,350–£2,500
  • Programmable smart thermostat

Wet system

£1,700–£3,400
  • Screed or low-profile boards

Guide prices for Longfield including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Longfield

We cover every part of Longfield, including DA3, DA4 and DA13, and nearby Hartley (0.7 miles) and Swanscombe (3.5 miles).

Being a smaller town does not change how we work in Longfield: free survey, written quote, one team. For Longfield homes having the bathroom floor replaced, underfloor heating adds one to two days to the fit. If your Longfield bathroom has a cold tiled floor and no room for a bigger radiator, an electric mat under new tiles is the simplest answer.

Supplies across most of Kent are very hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
  • A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
  • Bringing the system up to temperature gradually once the adhesive and grout have cured
  • A floor sensor set between the heating runs and wired back to the thermostat

Decisions to make first

Floor finish

Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.

Insulation board thickness

Thicker boards warm up faster and lose less heat downwards, but raise the floor; the right choice depends on the door threshold and the next room.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Longfield: questions

How much does bathroom underfloor heating cost in Longfield?

Bathroom underfloor heating in Longfield usually costs £800–£2,800 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Is the home survey in Longfield really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover DA3 in Longfield?

Yes. We cover all of Longfield, including DA3, DA4 and DA13, and nearby Hartley, Swanscombe and Gravesend. Survey visits are free and arranged at a time that suits you.

Is the water hard in Longfield?

Supplies across most of Kent are very hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Do I need an electrician to install bathroom underfloor heating?

Yes, for the connection. The fitter can lay the mat, but the supply, RCD protection and thermostat in a bathroom must be installed and tested by a qualified electrician, and in England and Wales the work is notifiable under Part P. Our underfloor heating guide covers the choices in more depth.

Underfloor heating in Longfield

Book a free home survey in Longfield. You get a measured layout and an itemised written price before anything is ordered.