Underfloor heating in Maidstone

Postcode districts: ME14, ME15, ME16
Nearby: Chatham, Rochester and Gillingham
Guide price: £800–£2,800
Typical time on site: 1–2 working days (added to a fit)
Water: Very hard across most of Kent
Survey: Free, at your home

What does bathroom underfloor heating cost in Maidstone?

As a guide, budget £800 to £2,800 including VAT for bathroom underfloor heating in Maidstone; your written quote will pin it down. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£800–£1,700

Thermostat and RCD-protected supply

Electric, larger room

£1,350–£2,500

Whole floor coverage

Wet system

£1,700–£3,400

Manifold or single-zone kit

Guide prices for Maidstone including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Maidstone

We work right across Maidstone — ME14, ME15 and ME16 — and in neighbouring Chatham and Rochester.

Maidstone has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. Where a Maidstone home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric. Whether your Maidstone bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room.

Water across much of Kent is very hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A check of the floor construction, the room's heat loss and where the thermostat and supply will go
Bringing the system up to temperature gradually once the adhesive and grout have cured
A floor sensor set between the heating runs and wired back to the thermostat
The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit

Decisions to make first

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Mat or loose cable

Mats are quickest on square, open floors. Loose cable is easier to route around awkward shapes, pipe boxing and a curved shower area.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Maidstone: questions

How much does bathroom underfloor heating cost in Maidstone?

Bathroom underfloor heating in Maidstone usually costs £800–£2,800 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover ME14 in Maidstone?

Yes. We cover all of Maidstone, including ME14, ME15 and ME16, and nearby Chatham, Rochester and Gillingham. Survey visits are free and arranged at a time that suits you.

Is the water hard in Maidstone?

Who handles building control for bathroom underfloor heating in Maidstone?

Building control for Maidstone is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Is electric underfloor heating expensive to run in a bathroom?

Running cost depends on the heated area, the insulation under the mat, how long it runs and your electricity tariff. As an example, a 150 W per m² mat covering 3 m² draws 450 W, so two hours a day uses about 0.9 kWh. A timer and floor sensor stop it running when nobody is using the room.