- Postcode districts
- LE9, LE10
- Nearby
- Hinckley, Nuneaton and Leicester
- Guide price
- £650–£2,400
- Typical time on site
- 1–2 working days (added to a fit)
- Water
- Hard across most of Leicestershire
- Survey
- Free, at your home
What does bathroom underfloor heating cost in Earl Shilton?
For Earl Shilton, our guide range for bathroom underfloor heating is £650 to £2,400 including VAT. Prices in East Midlands run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Electric mat
- Insulation board
Electric, larger room
- Electrician sign-off
Wet system
- Pipes linked to the heating
Guide prices for Earl Shilton including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Earl Shilton
In Earl Shilton we cover LE9 and LE10; we also cover Hinckley, 3.7 miles away, and Nuneaton.
Being a smaller town does not change how we work in Earl Shilton: free survey, written quote, one team. We check door thresholds in Earl Shilton homes at the survey, because underfloor heating and new tiles raise the floor slightly. For Earl Shilton homes having the bathroom floor replaced, underfloor heating adds one to two days to the fit.
Water across much of Leicestershire is hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
- A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
- For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
- Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
Decisions to make first
Mat or loose cable
Mats are quickest on square, open floors. Loose cable is easier to route around awkward shapes, pipe boxing and a curved shower area.
Electric or wet
Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.
Rules that apply in England
In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

