Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Surrey · KT23

Underfloor heating in Dorking

From KT23 to RH4, we survey and quote for underfloor heating across Dorking. You get one point of contact and a fixed written price once the details are agreed.

£800–£2,800 inc VAT1–2 working days (added to a fit)Free home survey
Electric underfloor heating mat laid before tiling, example for Dorking
Postcode districts
KT23, RH4
Nearby
Leatherhead, Reigate and Redhill
Guide price
£800–£2,800
Typical time on site
1–2 working days (added to a fit)
Water
Hard across most of Surrey
Survey
Free, at your home

What does bathroom underfloor heating cost in Dorking?

In Dorking, bathroom underfloor heating typically costs £800–£2,800 including VAT, based on South East England prices. Labour costs in South East England put local prices at about 12% above the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Electric, larger room

£1,350–£2,500
  • Electrician sign-off

Wet system

£1,700–£3,400
  • Pipes linked to the heating

Guide prices for Dorking including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Dorking

We cover every part of Dorking, including KT23 and RH4, and nearby Leatherhead (4.4 miles) and Reigate (5.5 miles).

Being a smaller town does not change how we work in Dorking: free survey, written quote, one team. If your Dorking home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below. Where a Dorking home already has a heat pump, or the heating is being altered, a wet underfloor system is worth comparing with electric.

Water across much of Surrey is hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • For wet systems, pipes in low-profile boards or screed connected to a manifold or single-zone kit, with any boiler work done by a Gas Safe registered engineer
  • A check of the floor construction, the room's heat loss and where the thermostat and supply will go
  • Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
  • Resistance and insulation tests on the mat before, during and after tiling, with the readings recorded

Decisions to make first

Thermostat

A simple dial thermostat, a programmable one with set times, or a smart thermostat you can control from your phone.

Mat or loose cable

Mats are quickest on square, open floors. Loose cable is easier to route around awkward shapes, pipe boxing and a curved shower area.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Dorking: questions

How much should I budget for bathroom underfloor heating in Dorking?

Bathroom underfloor heating in Dorking usually costs £800–£2,800 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the water hard in Dorking?

Water across much of Surrey is hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for bathroom underfloor heating in Dorking?

Building control for Dorking is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does bathroom underfloor heating take?

Allow 1–2 working days (added to a fit) on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Dorking.

Can underfloor heating go under vinyl or LVT?

Yes, with a compatible system and floor. Most vinyl and LVT makers set a maximum floor temperature, often lower than for tiles, so the thermostat's floor sensor is set to that limit. Tiles and stone remain the most efficient finish over underfloor heating.

Underfloor heating in Dorking

Book a free home survey in Dorking. You get a measured layout and an itemised written price before anything is ordered.