Vanity units in Bexhill-on-Sea

Postcode districts: TN38, TN39, TN40
Nearby: Hastings, Hailsham and Eastbourne
Guide price: £400–£1,700
Typical time on site: half a day to 1 day
Water: Hard across most of East Sussex
Survey: Free, at your home

What does a new vanity unit cost in Bexhill-on-Sea?

As a guide, budget £400 to £1,700 including VAT for a new vanity unit in Bexhill-on-Sea; your written quote will pin it down. Prices in South East England run at about 12% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Fit your unit

£170–£400

Taps and waste connected

Typical

Supply and fit

£450–£1,100

Removal of the old basin

Double or bespoke

£1,100–£2,800

Double basin or long run

Guide prices for Bexhill-on-Sea including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Bexhill-on-Sea

We cover every part of Bexhill-on-Sea, including TN38, TN39 and TN40, and nearby Hastings (4.8 miles) and Hailsham (9.3 miles).

Homes in and around Bexhill-on-Sea vary, so we look at the floor, the walls and the water system before we price anything. Wall-hung vanities in Bexhill-on-Sea homes are fixed to suit what the wall is built from, which we check at the survey. Landlords in Bexhill-on-Sea can have a worn basin replaced with a vanity unit in half a day to a day.

Most of East Sussex has hard water. Taps, plug wastes and toilet pans scale up quickly, so chrome copes better than matt black, and a removable aerator is worth having. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A new tap, trap and the correct slotted or unslotted waste for the basin
A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
Fitting the unit level, with the basin sealed to the top and the top sealed to the wall
Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system

Decisions to make first

Width

Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.

Waste and overflow

A basin with an overflow takes a slotted waste; one without needs an unslotted waste, often a push-button 'click-clack' type.

Rules that apply in England

In England, the tap and supply pipework come under the Water Supply (Water Fittings) Regulations 1999. A new waste connection to the soil stack can be Part H work, and adding a light to the unit or above it is notifiable under Part P.

More about vanity units

Vanity units in Bexhill-on-Sea: questions

How much should I budget for a new vanity unit in Bexhill-on-Sea?

A new vanity unit in Bexhill-on-Sea usually costs £400–£1,700 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Who handles building control for a new vanity unit in Bexhill-on-Sea?

Building control for Bexhill-on-Sea is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new vanity unit take?

Allow half a day to 1 day on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Bexhill-on-Sea.

Is the home survey in Bexhill-on-Sea really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do vanity units come with a basin and tap?

Most vanity units are sold with a basin or a one-piece basin and top, while the tap and waste are usually bought separately. Check whether the basin has a tap hole and an overflow, because that decides which tap and waste you need.