Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Greater Manchester · M34

Vanity units in Denton

Vanity units in Denton, planned from measurements taken in your home and priced in writing. We cover M34, SK5 and SK16 and the surrounding area.

£350–£1,400 inc VAThalf a day to 1 dayFree home survey
Wall-hung vanity unit with a basin, tap and mirror, example for Denton
Postcode districts
M34, SK5, SK16
Nearby
Hyde, Dukinfield and Droylsden
Guide price
£350–£1,400
Typical time on site
half a day to 1 day
Water
Soft across most of Greater Manchester
Survey
Free, at your home

What does a new vanity unit cost in Denton?

Our guide price for a new vanity unit in Denton is £350–£1,400 including VAT. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Fit your unit

£140–£350
  • Taps and waste connected

Double or bespoke

£950–£2,400
  • Double basin or long run

Guide prices for Denton including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Denton

In Denton we cover M34, SK5 and SK16; we also cover Hyde, 1.6 miles away, and Dukinfield.

Homes in and around Denton vary, so we look at the floor, the walls and the water system before we price anything. If you have bought a vanity unit for your Denton bathroom, fit-only installation covers connecting the tap and waste and testing for leaks. If your Denton water is hard, a tap with a removable aerator and a smooth one-piece basin top are easier to keep clean.

Water across much of Greater Manchester is soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Testing for leaks and checking the trap holds its seal
  • A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
  • Moving the waste and supply positions where the new unit needs them higher, lower or to one side
  • Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system

Decisions to make first

Drawers or doors

Drawers keep things visible and reachable but lose some space to the trap. Doors give a deeper cupboard and cost less.

Width

Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.

Rules that apply in England

In England, the tap and supply pipework come under the Water Supply (Water Fittings) Regulations 1999. A new waste connection to the soil stack can be Part H work, and adding a light to the unit or above it is notifiable under Part P.

More about vanity units

Vanity units in Denton: questions

What is the price of a new vanity unit in Denton?

A new vanity unit in Denton usually costs £350–£1,400 including VAT. Room size, layout changes and your choice of products move the figure within that range. The free survey gives you an itemised quote, fixed in writing once the details are agreed.

Who handles building control for a new vanity unit in Denton?

Building control for Denton is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a new vanity unit take?

Allow half a day to 1 day on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Denton.

Is the home survey in Denton really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Can a wall-hung vanity unit go on a stud wall?

Yes, if there are timber noggins or a fixing frame behind the board at the right height. In a new stud wall these go in before boarding; in an existing one, the board is opened, noggins are added and the wall is made good. Plasterboard fixings alone are not enough for a loaded basin unit.

Vanity units in Denton

Book a free home survey in Denton. You get a measured layout and an itemised written price before anything is ordered.