- Postcode districts
- M34, SK14, SK16
- Nearby
- Denton, Dukinfield and Stalybridge
- Guide price
- £350–£1,400
- Typical time on site
- half a day to 1 day
- Water
- Soft across most of Greater Manchester
- Survey
- Free, at your home
What does a new vanity unit cost in Hyde?
For Hyde, our guide range for a new vanity unit is £350 to £1,400 including VAT. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Fit your unit
- Fitting a unit you have bought
Supply and fit
- Basin, tap and waste
Double or bespoke
- Re-tiling behind
Guide prices for Hyde including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Hyde
As well as Hyde itself (M34, SK14 and SK16), we survey in Denton, Dukinfield and Stalybridge.
Homes in and around Hyde vary, so we look at the floor, the walls and the water system before we price anything. If your Hyde cloakroom still has a pedestal basin, a compact vanity unit adds storage without taking more floor. Landlords in Hyde can have a worn basin replaced with a vanity unit in half a day to a day.
Water across much of Greater Manchester is soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Patching or re-tiling the wall where the old basin left gaps
- Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
- A new tap, trap and the correct slotted or unslotted waste for the basin
- Moving the waste and supply positions where the new unit needs them higher, lower or to one side
Decisions to make first
Drawers or doors
Drawers keep things visible and reachable but lose some space to the trap. Doors give a deeper cupboard and cost less.
Width
Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.
Rules that apply in England
In England, the tap and supply pipework come under the Water Supply (Water Fittings) Regulations 1999. A new waste connection to the soil stack can be Part H work, and adding a light to the unit or above it is notifiable under Part P.
