- Postcode districts
- ML5
- Nearby
- Airdrie, Bellshill and Motherwell
- Guide price
- £350–£1,450
- Typical time on site
- half a day to 1 day
- Water
- Soft across most of Lanarkshire
- Survey
- Free, at your home
What does a new vanity unit cost in Coatbridge?
As a guide, budget £350 to £1,450 including VAT for a new vanity unit in Coatbridge; your written quote will pin it down. We adjust the national guide for Scotland, where prices are typically about 4% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Fit your unit
- Fitting a unit you have bought
Supply and fit
- Basin, tap and waste
Double or bespoke
- Re-tiling behind
Guide prices for Coatbridge including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Coatbridge
As well as Coatbridge itself (ML5), we survey in Airdrie, Bellshill and Motherwell.
In Coatbridge, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Coatbridge water is hard, a tap with a removable aerator and a smooth one-piece basin top are easier to keep clean. Wall-hung vanities in Coatbridge homes are fixed to suit what the wall is built from, which we check at the survey.
Water across much of Lanarkshire is soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
- Testing for leaks and checking the trap holds its seal
- Fitting the unit level, with the basin sealed to the top and the top sealed to the wall
- Moving the waste and supply positions where the new unit needs them higher, lower or to one side
Decisions to make first
One basin or two
Two basins help a busy household if the wall is long enough. In a smaller room, one basin with a longer top often works better.
Width
Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.
Rules that apply in Scotland
In Scotland, a replacement vanity unit does not need a building warrant. The Scottish Water Byelaws 2014 cover the new tap and supplies.

