What does a new vanity unit cost in Lanarkshire?
Our guide range in Lanarkshire is £350–£1,450 including VAT. Prices in Lanarkshire run at about 4% below the UK guide, based on Scotland labour rates.
Fit your unit
- Fitting a unit you have bought
Supply and fit
- Basin, tap and waste
Double or bespoke
- Re-tiling behind
Guide prices for Lanarkshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Lanarkshire?
- East Kilbride
- Hamilton
- Cumbernauld
- Coatbridge
- Airdrie
- Motherwell
- Rutherglen
- Cambuslang
- Wishaw
- Bellshill
- Blantyre
- Larkhall
Most of Lanarkshire is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your East Kilbride cloakroom still has a pedestal basin, a compact vanity unit adds storage without taking more floor.
What the job includes
- A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
- Removal of the old basin and pedestal, or old vanity, and taking it away
- Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
- Moving the waste and supply positions where the new unit needs them higher, lower or to one side
- A new tap, trap and the correct slotted or unslotted waste for the basin
- Testing for leaks and checking the trap holds its seal
Decisions to make first
Basin type
An inset or semi-recessed basin, a one-piece moulded top, or a countertop basin on a worktop. Countertop basins need a tall tap or a wall-mounted one.
Width
Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.
Drawers or doors
Drawers keep things visible and reachable but lose some space to the trap. Doors give a deeper cupboard and cost less.
Wall-hung or floor-standing
Wall-hung units leave the floor clear and are easy to clean under, but need a strong wall. Floor-standing units hold more and suit weak or uneven walls.
Rules that apply in Scotland
Replacing a basin with a vanity unit does not need planning permission or building regulations approval. The new tap must meet the water fittings rules, including protection against backflow, and the waste should connect to the existing drainage through a proper trap. If the unit has a light, or a lit mirror goes above it, the electrical work must suit the zone it sits in under BS 7671 and be RCD protected.
In Scotland, a replacement vanity unit does not need a building warrant. The Scottish Water Byelaws 2014 cover the new tap and supplies.

