What does a new vanity unit cost in Ayrshire?
Our guide range in Ayrshire is £350–£1,450 including VAT. Prices in Ayrshire run at about 4% below the UK guide, based on Scotland labour rates.
Fit your unit
- Taps and waste connected
Supply and fit
- Removal of the old basin
Double or bespoke
- Double basin or long run
Guide prices for Ayrshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Ayrshire?
Water across much of Ayrshire is soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Kilmarnock cloakroom still has a pedestal basin, a compact vanity unit adds storage without taking more floor.
What the job includes
- Moving the waste and supply positions where the new unit needs them higher, lower or to one side
- Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
- Patching or re-tiling the wall where the old basin left gaps
- A new tap, trap and the correct slotted or unslotted waste for the basin
- Fitting the unit level, with the basin sealed to the top and the top sealed to the wall
- A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
Decisions to make first
Waste and overflow
A basin with an overflow takes a slotted waste; one without needs an unslotted waste, often a push-button 'click-clack' type.
Width
Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.
One basin or two
Two basins help a busy household if the wall is long enough. In a smaller room, one basin with a longer top often works better.
Wall-hung or floor-standing
Wall-hung units leave the floor clear and are easy to clean under, but need a strong wall. Floor-standing units hold more and suit weak or uneven walls.
Rules that apply in Scotland
Replacing a basin with a vanity unit does not need planning permission or building regulations approval. The new tap must meet the water fittings rules, including protection against backflow, and the waste should connect to the existing drainage through a proper trap. If the unit has a light, or a lit mirror goes above it, the electrical work must suit the zone it sits in under BS 7671 and be RCD protected.
In Scotland, a replacement vanity unit does not need a building warrant. The Scottish Water Byelaws 2014 cover the new tap and supplies.