What does a new vanity unit cost in Powys?
Our guide range in Powys is £350–£1,400 including VAT. Prices in Powys run at about 7% below the UK guide, based on Wales labour rates.
Fit your unit
- Sealed and tested
Supply and fit
- Floor-standing or wall-hung unit
Double or bespoke
- Stone or solid-surface top
Guide prices for Powys including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Powys?
Most of Powys is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier. We quote vanity unit work in Newtown after seeing the wall and pipework, so any re-tiling is on the quote from the start.
What the job includes
- Removal of the old basin and pedestal, or old vanity, and taking it away
- Fitting the unit level, with the basin sealed to the top and the top sealed to the wall
- Patching or re-tiling the wall where the old basin left gaps
- A new tap, trap and the correct slotted or unslotted waste for the basin
- A check that the wall can carry a wall-hung unit, with fixings to suit solid or stud walls
- Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system
Decisions to make first
Basin type
An inset or semi-recessed basin, a one-piece moulded top, or a countertop basin on a worktop. Countertop basins need a tall tap or a wall-mounted one.
Waste and overflow
A basin with an overflow takes a slotted waste; one without needs an unslotted waste, often a push-button 'click-clack' type.
Width
Compact units around 400 mm wide suit cloakrooms; family bathrooms often take 600 to 800 mm for one basin and 1200 mm or more for two.
Drawers or doors
Drawers keep things visible and reachable but lose some space to the trap. Doors give a deeper cupboard and cost less.
Rules that apply in Wales
Replacing a basin with a vanity unit does not need planning permission or building regulations approval. The new tap must meet the water fittings rules, including protection against backflow, and the waste should connect to the existing drainage through a proper trap. If the unit has a light, or a lit mirror goes above it, the electrical work must suit the zone it sits in under BS 7671 and be RCD protected.
Wales follows the same water fittings regulations as England. Its own Part P covers more electrical work, so a lit vanity or mirror should be connected by a registered electrician.