Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Powys · SY16

Vanity units in Newtown

If you are planning a new vanity unit in Newtown, the first step is a free survey visit: we measure, check your pipework and electrics, and give you a written quote.

£350–£1,400 inc VAThalf a day to 1 dayFree home survey
Wall-hung vanity unit with a basin, tap and mirror, example for Newtown
Postcode districts
SY16
Nearby
Welshpool, Brecon and Ystalyfera
Guide price
£350–£1,400
Typical time on site
half a day to 1 day
Water
Soft across most of Powys
Survey
Free, at your home

What does a new vanity unit cost in Newtown?

As a guide, budget £350 to £1,400 including VAT for a new vanity unit in Newtown; your written quote will pin it down. Prices in Wales run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Fit your unit

£140–£350
  • Fitting a unit you have bought

Double or bespoke

£950–£2,300
  • Re-tiling behind

Guide prices for Newtown including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Newtown

We cover every part of Newtown, including SY16, and nearby Welshpool (11.8 miles) and Brecon (39.6 miles).

Being a smaller town does not change how we work in Newtown: free survey, written quote, one team. Landlords in Newtown can have a worn basin replaced with a vanity unit in half a day to a day. If your Newtown water is hard, a tap with a removable aerator and a smooth one-piece basin top are easier to keep clean.

Most of Powys is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A new tap, trap and the correct slotted or unslotted waste for the basin
  • Testing for leaks and checking the trap holds its seal
  • Removal of the old basin and pedestal, or old vanity, and taking it away
  • Isolation valves on the hot and cold supplies, so the tap can be changed later without draining the system

Decisions to make first

Wall-hung or floor-standing

Wall-hung units leave the floor clear and are easy to clean under, but need a strong wall. Floor-standing units hold more and suit weak or uneven walls.

Drawers or doors

Drawers keep things visible and reachable but lose some space to the trap. Doors give a deeper cupboard and cost less.

Rules that apply in Wales

Wales follows the same water fittings regulations as England. Its own Part P covers more electrical work, so a lit vanity or mirror should be connected by a registered electrician.

More about vanity units

Vanity units in Newtown: questions

How much should I budget for a new vanity unit in Newtown?

A new vanity unit in Newtown usually costs £350–£1,400 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Do you cover SY16 in Newtown?

Yes. We cover all of Newtown, including SY16, and nearby Welshpool, Brecon and Ystalyfera. Survey visits are free and arranged at a time that suits you.

Is the water hard in Newtown?

Most of Powys is supplied with soft water. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a new vanity unit in Newtown?

Building control for Newtown is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can a wall-hung vanity unit go on a stud wall?

Yes, if there are timber noggins or a fixing frame behind the board at the right height. In a new stud wall these go in before boarding; in an existing one, the board is opened, noggins are added and the wall is made good. Plasterboard fixings alone are not enough for a loaded basin unit.

Vanity units in Newtown

Book a free home survey in Newtown. You get a measured layout and an itemised written price before anything is ordered.