Walk-in showers in Putney

Postcode districts: SW6, SW15, SW18
Nearby: Fulham, Wimbledon and Chiswick
Guide price: £3,100–£7,500
Typical time on site: 2–5 working days
Water: Very hard across most of Greater London
Survey: Free, at your home

What does a walk-in shower cost in Putney?

As a guide, budget £3,100 to £7,500 including VAT for a walk-in shower in Putney; your written quote will pin it down. We adjust the national guide for London, where prices are typically about 25% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Tray and screen

£2,500–£5,000

Low-profile tray and 8 mm glass panel

Frameless upgrade

£4,400–£6,900

Concealed thermostatic valve

Tiled level floor

£5,000–£9,400

Floor and wall tiling

Guide prices for Putney including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Putney

We work right across Putney — SW6, SW15 and SW18 — and in neighbouring Fulham and Wimbledon.

In Putney, many bathrooms are in flats or converted houses, so we check lease consents, access and the floor below before we price. We measure walk-in showers in Putney so the tray and panel are sized together, which is what keeps the spray in. If you are planning ahead in Putney for easier access, a low-profile walk-in tray gives most of the benefit without a full wet room.

Water across much of Greater London is very hard. If your supply in Putney is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A thermostatic valve with a riser rail, a fixed head or both
Tanking to the shower walls, and to the floor where it is tiled
Silicone, a full-flow test for leaks and spray, and handover
A survey of the space, the waste position, water pressure and the hot-water system

Decisions to make first

Tray length

Go long rather than wide. A 1400 to 1700 mm tray with a 900 to 1200 mm panel leaves a dry walkway; a 1200 mm tray works but gives less margin for spray.

Valve

An exposed bar valve with a riser rail is easy to fit and service. A concealed valve hides the pipework and suits a fixed overhead head.

Rules that apply in England

In England, moving or adding lights, a fan or a shower circuit in a room with a bath or shower is notifiable under Part P. A tiled level floor that needs a new drain connection at the soil stack can bring in Part H.

More about walk-in showers

Walk-in showers in Putney: questions

How much should I budget for a walk-in shower in Putney?

A walk-in shower in Putney usually costs £3,100–£7,500 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Do you cover SW6 in Putney?

Yes. We cover all of Putney, including SW6, SW15 and SW18, and nearby Fulham, Wimbledon and Chiswick. Survey visits are free and arranged at a time that suits you.

Is the water hard in Putney?

Who handles building control for a walk-in shower in Putney?

Building control for Putney is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Can a walk-in shower replace a bath?

Yes. A standard bath is about 1700 by 700 mm, so a 1700 mm tray fits the same space and can often use the existing waste position. It is one of the simplest ways to get a walk-in shower; our bath to shower conversions page covers that job in detail.