Walk-in showers in Johnstone

Postcode districts: PA5
Nearby: Paisley, Barrhead and Erskine
Guide price: £2,400–£5,800
Typical time on site: 2–5 working days
Water: Soft across most of Renfrewshire and Inverclyde
Survey: Free, at your home

What does a walk-in shower cost in Johnstone?

As a guide, budget £2,400 to £5,800 including VAT for a walk-in shower in Johnstone; your written quote will pin it down. Prices in Scotland run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Tray and screen

£1,900–£3,800

Tiling to the shower walls

Frameless upgrade

£3,400–£5,300

Large tray and frameless screen

Tiled level floor

£3,800–£7,200

Level threshold

Guide prices for Johnstone including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Johnstone

In Johnstone we cover PA5; we also cover Paisley, 3.2 miles away, and Barrhead.

Johnstone gets the same process as anywhere else: a free survey at your home and a written, itemised quote. For a walk-in shower in Johnstone, we check the water pressure first, so the head you choose will actually perform. If you are planning ahead in Johnstone for easier access, a low-profile walk-in tray gives most of the benefit without a full wet room.

Water across much of Renfrewshire and Inverclyde is soft. If that holds for your street in Johnstone, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A low-profile stone-resin tray, or a floor former with a linear drain for a tiled level floor
Silicone, a full-flow test for leaks and spray, and handover
Removal of the old bath or enclosure and making good to the walls and floor
An 8 mm or 10 mm toughened glass panel with a wall profile and support arm, or a frameless fixing

Decisions to make first

Tray or tiled floor

A tray is quicker, costs less and has a small lip. A tiled floor with a linear drain sits level with the rest of the room and lets one tile run throughout.

Niche

A recessed shelf in the back wall keeps bottles off the tray. It has to be planned at first fix and tanked like the rest of the wall.

Rules that apply in Scotland

In Scotland, a straight swap from a bath or enclosure to a walk-in shower does not normally need a building warrant, though altering the drainage may. Water fittings must meet the Scottish Water Byelaws 2014.

More about walk-in showers

Walk-in showers in Johnstone: questions

How much should I budget for a walk-in shower in Johnstone?

A walk-in shower in Johnstone usually costs £2,400–£5,800 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Is the home survey in Johnstone really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do you cover PA5 in Johnstone?

Yes. We cover all of Johnstone, including PA5, and nearby Paisley, Barrhead and Erskine. Survey visits are free and arranged at a time that suits you.

Is the water hard in Johnstone?

What is the difference between a walk-in shower and a wet room?

A walk-in shower uses a tray, or a tanked shower area, with a glass panel, so only the shower area is waterproofed. In a wet room the whole floor is tanked and falls to a drain. A walk-in shower costs less and is quicker to fit; a wet room gives a fully level floor from wall to wall.