Wet rooms in Cumbria

What does a wet room cost in Cumbria?

Our guide range in Cumbria is £5,600–£11,250 including VAT. Prices in Cumbria run at about 6% below the UK guide, based on North West England labour rates.

Compact

£4,200–£6,600

Floor former and linear or centre drain

Typical

Signature

£6,600–£11,250

Underfloor heating option

Large or luxury

£11,250–£17,000

Full conversion of a larger room

Guide prices for Cumbria including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Cumbria?

Supplies across most of Cumbria are soft. If that holds for your street in Carlisle, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you are planning a wet room in Carlisle for level access, we design the fall and drain so the floor is flush from the doorway.

What the job includes

Strip-out, waste removal, a final flow test to the drain and handover
A thermostatic shower valve, exposed or concealed, with heads to suit your water system
A survey of the floor construction, the joist size and direction or the concrete slab, and the route to the soil stack
A frameless glass screen fixed to the wall and floor
Slip-resistant porcelain floor tiles and wall tiling
Full tanking of the floor and the shower walls, with sealed corners, pipe collars and a sealed drain connection

Decisions to make first

Underfloor heating

Electric underfloor heating under the tiles dries the floor quickly after a shower; it is typically £700 to £1,500 for a bathroom.

Open or screened

A fully open shower with no glass only works in a larger room, with the basin, WC and towels well away from the spray.

Screen size

A screen of 1200 mm or more keeps spray off the rest of the room in most layouts. In a very small wet room, expect the whole floor to get wet.

Floor tile

Matt or textured porcelain with good slip resistance. Mosaic gives extra grip on a centre-drain floor because of its many grout lines.

Rules that apply in England

A wet room inside an existing home does not need planning permission. In a flat, check the lease: freeholder consent is often needed, and both the leak risk and the sound insulation to the flat below matter. Electrics must meet BS 7671, with 30 mA RCD protection, at least IPX4 fittings in zone 1 up to 2.25 m above the shower floor, IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1.

In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.

Wet rooms in Cumbria: questions

How much does a wet room cost in Cumbria?

A wet room in Cumbria typically costs £5,600–£11,250 including VAT, based on North West England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Cumbria do you cover?

We cover the whole of Cumbria, including Carlisle, Barrow in Furness, Kendal, Whitehaven, Workington and Penrith. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a wet room take?

Most jobs take 5–10 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Cumbria?

Do wet rooms leak?

A properly tanked wet room should not leak. When one does, the cause is usually a gap in the membrane at a corner or pipe, a poor drain connection, or a floor that flexes and splits the seal. Leaks in wet rooms are expensive to trace, which is why the floor is stiffened first and the tanking is checked before tiling.