What does a wet room cost in Gloucestershire?
Our guide range in Gloucestershire is £6,100–£12,250 including VAT.
Compact
- Floor former and linear or centre drain
Signature
- Underfloor heating option
Large or luxury
- Full conversion of a larger room
Guide prices for Gloucestershire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Gloucestershire?
Water across much of Gloucestershire is hard. If your supply in Gloucester is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If your Gloucester home has a concrete ground floor, a downstairs wet room may need the screed cut out to set the drain.
What the job includes
- A thermostatic shower valve, exposed or concealed, with heads to suit your water system
- Floor strengthening or a ply overlay on timber floors so the surface does not flex
- Full tanking of the floor and the shower walls, with sealed corners, pipe collars and a sealed drain connection
- A pre-formed floor former with a linear or centre drain, or a screed laid to fall
- Strip-out, waste removal, a final flow test to the drain and handover
- Extractor fan and lighting by a qualified electrician, tested and certified, with underfloor heating if you choose it
Decisions to make first
Linear or centre drain
A linear drain along one wall lets the floor fall in a single direction, so large tiles can be laid without awkward cuts. A centre drain needs a four-way fall and suits smaller tiles or mosaic.
Open or screened
A fully open shower with no glass only works in a larger room, with the basin, WC and towels well away from the spray.
Former or screed
A pre-formed board gives a consistent fall and suits timber floors. A sand and cement screed suits concrete slabs and larger shower areas.
Underfloor heating
Electric underfloor heating under the tiles dries the floor quickly after a shower; it is typically £700 to £1,500 for a bathroom.
Rules that apply in England
A wet room inside an existing home does not need planning permission. In a flat, check the lease: freeholder consent is often needed, and both the leak risk and the sound insulation to the flat below matter. Electrics must meet BS 7671, with 30 mA RCD protection, at least IPX4 fittings in zone 1 up to 2.25 m above the shower floor, IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1.
In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.