Wet rooms in Surrey

What does a wet room cost in Surrey?

Our guide range in Surrey is £6,700–£13,500 including VAT. Prices in Surrey run at about 12% above the UK guide, based on South East England labour rates.

Compact

£5,000–£7,800

Under about 4 m²

Typical

Signature

£7,800–£13,500

Frameless screen, thermostatic shower

Large or luxury

£13,500–£20,250

Concealed valves, feature lighting

Guide prices for Surrey including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Surrey?

Water across much of Surrey is hard. If your supply in Woking is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. For a wet room in a Woking flat, the first step is the lease, because freeholder consent is often needed before any work starts.

What the job includes

Strip-out, waste removal, a final flow test to the drain and handover
Full tanking of the floor and the shower walls, with sealed corners, pipe collars and a sealed drain connection
A thermostatic shower valve, exposed or concealed, with heads to suit your water system
Floor strengthening or a ply overlay on timber floors so the surface does not flex
A survey of the floor construction, the joist size and direction or the concrete slab, and the route to the soil stack
Slip-resistant porcelain floor tiles and wall tiling

Decisions to make first

Floor tile

Matt or textured porcelain with good slip resistance. Mosaic gives extra grip on a centre-drain floor because of its many grout lines.

Screen size

A screen of 1200 mm or more keeps spray off the rest of the room in most layouts. In a very small wet room, expect the whole floor to get wet.

Open or screened

A fully open shower with no glass only works in a larger room, with the basin, WC and towels well away from the spray.

Former or screed

A pre-formed board gives a consistent fall and suits timber floors. A sand and cement screed suits concrete slabs and larger shower areas.

Rules that apply in England

A wet room inside an existing home does not need planning permission. In a flat, check the lease: freeholder consent is often needed, and both the leak risk and the sound insulation to the flat below matter. Electrics must meet BS 7671, with 30 mA RCD protection, at least IPX4 fittings in zone 1 up to 2.25 m above the shower floor, IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1.

In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.

Wet rooms in Surrey: questions

How much does a wet room cost in Surrey?

A wet room in Surrey typically costs £6,700–£13,500 including VAT, based on South East England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Surrey do you cover?

We cover the whole of Surrey, including Woking, Guildford, Esher, Redhill, Staines, Banstead, Leatherhead and Ewell. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a wet room take?

Most jobs take 5–10 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Surrey?

What is tanking in a wet room?

Tanking is the waterproof layer under the tiles that stops water reaching the floor and walls. It is usually a liquid or sheet membrane, with sealing tape at every corner, board joint and pipe. Tiles and grout are not waterproof on their own, so the tanking is what actually keeps the water in.