Wet rooms in Washington

Postcode districts: NE37, NE38
Nearby: Chester-le-Street, Felling and Houghton-Le-Spring
Guide price: £5,400–£10,750
Typical time on site: 5–10 working days
Water: Soft across most of Tyne and Wear
Survey: Free, at your home

What does a wet room cost in Washington?

For Washington, our guide range for a wet room is £5,400 to £10,750 including VAT. Prices in North East England run at about 10% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Compact

£4,000–£6,300

Floor former and linear or centre drain

Typical

Signature

£6,300–£10,750

Underfloor heating option

Large or luxury

£10,750–£16,250

Full conversion of a larger room

Guide prices for Washington including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Washington

In Washington we cover NE37 and NE38; we also cover Chester-le-Street, 3.7 miles away, and Felling.

Homes in and around Washington vary, so we look at the floor, the walls and the water system before we price anything. In a compact Washington bathroom, a wet room frees the space a tray and enclosure would take, but expect the whole floor to get wet. If your Washington home has a concrete ground floor, a downstairs wet room may need the screed cut out to set the drain.

Water across much of Tyne and Wear is soft. If that holds for your street in Washington, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A survey of the floor construction, the joist size and direction or the concrete slab, and the route to the soil stack
A thermostatic shower valve, exposed or concealed, with heads to suit your water system
Full tanking of the floor and the shower walls, with sealed corners, pipe collars and a sealed drain connection
A pre-formed floor former with a linear or centre drain, or a screed laid to fall

Decisions to make first

Floor tile

Matt or textured porcelain with good slip resistance. Mosaic gives extra grip on a centre-drain floor because of its many grout lines.

Open or screened

A fully open shower with no glass only works in a larger room, with the basin, WC and towels well away from the spray.

Rules that apply in England

In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.

More about wet rooms

Wet rooms in Washington: questions

What is the price of a wet room in Washington?

A wet room in Washington usually costs £5,400–£10,750 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Who handles building control for a wet room in Washington?

Building control for Washington is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does a wet room take?

Allow 5–10 working days on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Washington.

Is the home survey in Washington really free?

Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get a written, itemised quote with no obligation to go ahead.

Do wet rooms leak?

A properly tanked wet room should not leak. When one does, the cause is usually a gap in the membrane at a corner or pipe, a poor drain connection, or a floor that flexes and splits the seal. Leaks in wet rooms are expensive to trace, which is why the floor is stiffened first and the tanking is checked before tiling.