Wet rooms in Tyne and Wear

What does a wet room cost in Tyne and Wear?

Our guide range in Tyne and Wear is £5,400–£10,750 including VAT. Prices in Tyne and Wear run at about 10% below the UK guide, based on North East England labour rates.

Compact

£4,000–£6,300

Floor former and linear or centre drain

Typical

Signature

£6,300–£10,750

Underfloor heating option

Large or luxury

£10,750–£16,250

Full conversion of a larger room

Guide prices for Tyne and Wear including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Tyne and Wear?

Most of Tyne and Wear is supplied with soft water. If that holds for your street in Newcastle upon Tyne, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. We quote wet rooms in Newcastle upon Tyne only after looking at the floor construction, because that is where most of the cost difference lies.

What the job includes

A thermostatic shower valve, exposed or concealed, with heads to suit your water system
Floor strengthening or a ply overlay on timber floors so the surface does not flex
Strip-out, waste removal, a final flow test to the drain and handover
A frameless glass screen fixed to the wall and floor
A survey of the floor construction, the joist size and direction or the concrete slab, and the route to the soil stack
Extractor fan and lighting by a qualified electrician, tested and certified, with underfloor heating if you choose it

Decisions to make first

Underfloor heating

Electric underfloor heating under the tiles dries the floor quickly after a shower; it is typically £700 to £1,500 for a bathroom.

Floor tile

Matt or textured porcelain with good slip resistance. Mosaic gives extra grip on a centre-drain floor because of its many grout lines.

Screen size

A screen of 1200 mm or more keeps spray off the rest of the room in most layouts. In a very small wet room, expect the whole floor to get wet.

Linear or centre drain

A linear drain along one wall lets the floor fall in a single direction, so large tiles can be laid without awkward cuts. A centre drain needs a four-way fall and suits smaller tiles or mosaic.

Rules that apply in England

A wet room inside an existing home does not need planning permission. In a flat, check the lease: freeholder consent is often needed, and both the leak risk and the sound insulation to the flat below matter. Electrics must meet BS 7671, with 30 mA RCD protection, at least IPX4 fittings in zone 1 up to 2.25 m above the shower floor, IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1.

In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.

Wet rooms in Tyne and Wear: questions

How much does a wet room cost in Tyne and Wear?

A wet room in Tyne and Wear typically costs £5,400–£10,750 including VAT, based on North East England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in Tyne and Wear do you cover?

We cover the whole of Tyne and Wear, including Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington, Tynemouth, Wallsend and Newburn. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a wet room take?

Most jobs take 5–10 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in Tyne and Wear?

Can you have a wet room on a wooden floor?

Yes. On a timber floor, the former usually sits down between the joists so the finished floor stays level, and the joists may need trimming, strengthening or extra noggins. The floor must be stiff, often with a ply overlay, so it does not flex and crack the tiles or the tanking. We check the joists at the survey before quoting.