Wet rooms in County Durham

What does a wet room cost in County Durham?

Our guide range in County Durham is £5,400–£10,750 including VAT. Prices in County Durham run at about 10% below the UK guide, based on North East England labour rates.

Compact

£4,000–£6,300

Under about 4 m²

Typical

Signature

£6,300–£10,750

Frameless screen, thermostatic shower

Large or luxury

£10,750–£16,250

Concealed valves, feature lighting

Guide prices for County Durham including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in County Durham?

Water across much of County Durham is moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Darlington. Hardness varies street by street, so check the figure for your postcode with your water supplier. In a compact Darlington bathroom, a wet room frees the space a tray and enclosure would take, but expect the whole floor to get wet.

What the job includes

A thermostatic shower valve, exposed or concealed, with heads to suit your water system
A pre-formed floor former with a linear or centre drain, or a screed laid to fall
A frameless glass screen fixed to the wall and floor
Full tanking of the floor and the shower walls, with sealed corners, pipe collars and a sealed drain connection
Strip-out, waste removal, a final flow test to the drain and handover
Floor strengthening or a ply overlay on timber floors so the surface does not flex

Decisions to make first

Screen size

A screen of 1200 mm or more keeps spray off the rest of the room in most layouts. In a very small wet room, expect the whole floor to get wet.

Linear or centre drain

A linear drain along one wall lets the floor fall in a single direction, so large tiles can be laid without awkward cuts. A centre drain needs a four-way fall and suits smaller tiles or mosaic.

Former or screed

A pre-formed board gives a consistent fall and suits timber floors. A sand and cement screed suits concrete slabs and larger shower areas.

Floor tile

Matt or textured porcelain with good slip resistance. Mosaic gives extra grip on a centre-drain floor because of its many grout lines.

Rules that apply in England

A wet room inside an existing home does not need planning permission. In a flat, check the lease: freeholder consent is often needed, and both the leak risk and the sound insulation to the flat below matter. Electrics must meet BS 7671, with 30 mA RCD protection, at least IPX4 fittings in zone 1 up to 2.25 m above the shower floor, IPX5 where water jets are used, and no ordinary sockets within 3 m of zone 1.

In England, a new drain connection or changes at the soil stack can be building-regulations work under Part H, and new circuits or changes to the wiring in the room are notifiable under Part P. If the wet room is a newly formed bathroom, Approved Document F requires extract of 15 litres per second intermittent or 8 litres per second continuous.

Wet rooms in County Durham: questions

How much does a wet room cost in County Durham?

A wet room in County Durham typically costs £5,400–£10,750 including VAT, based on North East England prices. The free survey and itemised written quote give you the exact figure for your home.

Which towns in County Durham do you cover?

We cover the whole of County Durham, including Darlington, Hartlepool, Stockton-on-Tees, Durham, Chester-le-Street, Billingham, Stanley and Consett. If your town is not listed, we still cover it — get in touch with your postcode.

How long does a wet room take?

Most jobs take 5–10 working days on site once the products have arrived. We confirm a start date and a day-by-day plan when you approve the quote.

Is the water hard in County Durham?

Can I have a wet room in a flat?

Often, but check your lease first. Freeholder consent is commonly needed, especially where the drainage or the floor changes, and the risk of a leak into the flat below means the tanking and drain connection must be done with care. Sound insulation in the floor matters too.