Fitted bathrooms in Derbyshire
From Derby to Long Eaton, we fit complete bathrooms in Derbyshire with one team and one contract: survey, products, trades and fitting.
- Nation
- England
- Region
- East Midlands
- Towns listed
- 14
- Water
- Moderately hard across most of the area
- Price level
- Prices in Derbyshire run at about 4% below the UK guide, based on East Midlands labour rates.
Bathroom services in Derbyshire
Family bathroomsFrom £4,300 inc VAT
Wet roomsFrom £4,300 inc VAT
Small bathroomsFrom £3,800 inc VAT
Fitted bathroomsFrom £4,300 inc VAT
Fitted bathroom furnitureFrom £1,150 inc VAT
Bathroom renovationFrom £4,800 inc VAT
Luxury bathroomsFrom £11,500 inc VAT
En-suitesFrom £3,800 inc VAT
Bathroom lightingFrom £290 inc VAT
Bathroom designIncluded with supply and fit
Bathroom plumbingFrom £600 inc VAT
Bathroom fittingFrom £2,100 inc VAT
Bath replacementFrom £850 inc VAT
Vanity unitsFrom £145 inc VAT
Walk-in showersFrom £1,900 inc VAT
Accessible bathroomsFrom £5,800 inc VAT
Shower installationFrom £450 inc VAT
Cloakrooms & downstairs WCsFrom £1,750 inc VAT
Loft bathroomsFrom £5,300 inc VAT
Underfloor heatingFrom £650 inc VAT
Shower roomsFrom £3,800 inc VAT
Bath to shower conversionsFrom £1,900 inc VAT
Bathroom tilingFrom £45 per m² inc VAT
Bathroom strip-outFrom £600 inc VAT
Extractor fans & ventilationFrom £240 inc VAT
Bathroom tiling
Tiling quotes in Derby list the tile, the area and the preparation separately, so you can compare like for like.
From £45 per m² inc VAT
Prices and details
Bathroom lighting
We survey Derby bathrooms before quoting lighting, so the zones are measured from your actual bath and shower.
From £290 inc VAT
Prices and details
Luxury bathrooms
For a period house in Derby with high ceilings, we plan the lighting and tile heights to suit the proportions of the room.
From £11,500 inc VAT
Prices and detailsHow much does a bathroom cost in Derbyshire?
Prices in Derbyshire run at about 4% below the UK guide, based on East Midlands labour rates.
| Room or job | Guide price inc VAT | Time on site |
|---|---|---|
| Cloakrooms & downstairs WCs | £1,750–£4,300 | 2–4 working days |
| Fitted bathrooms | £6,200–£11,500 | 6–10 working days |
| Bathroom fitting | £2,100–£5,800 | 4–8 working days |
| Bath to shower conversions | £1,900–£4,800 | 2–6 working days |
| En-suites | £4,300–£8,600 | 4–8 working days |
| Accessible bathrooms | £5,800–£13,500 | 5–10 working days |
Water in Derbyshire
Supplies across most of Derbyshire are moderately hard. Easy-clean glass and good-quality brassware are money well spent. Hardness varies street by street, so check the figure for your postcode with your water supplier.
Rules for bathrooms in England
A like-for-like bathroom refit does not need planning permission. Electrical work in a bathroom must meet BS 7671, with RCD protection and IP-rated fittings near the bath and shower, and new taps, toilets and showers must meet the water fittings rules.
In England, new circuits and most changes to wiring in a room with a bath or shower are notifiable under Part P, so a registered electrician certifies them. New drainage or a new extractor where there was none can also be building regulations work; we tell you at the survey and handle the notification.
Bathrooms in Derbyshire: questions
How much does a new bathroom cost in Derbyshire?
A fitted bathroom in Derbyshire typically costs £6,200–£11,500 including VAT, supplied and installed. An en-suite is usually £4,300–£8,600 and a cloakroom £1,750–£4,300. Your exact price comes in writing after a free home survey.
Which towns in Derbyshire do you cover?
All of Derbyshire, including Derby, Chesterfield, Long Eaton, Ilkeston, Swadlincote, Staveley, Belper, Heanor, Alfreton and Dronfield. If your town is not listed, we still cover it.
Is the water hard in Derbyshire?
Supplies across most of Derbyshire are moderately hard. Easy-clean glass and good-quality brassware are money well spent. Hardness varies street by street, so check the figure for your postcode with your water supplier.
Do bathroom refits in Derbyshire need building regulations approval?
A like-for-like bathroom refit does not need planning permission. Electrical work in a bathroom must meet BS 7671, with RCD protection and IP-rated fittings near the bath and shower, and new taps, toilets and showers must meet the water fittings rules.
In England, new circuits and most changes to wiring in a room with a bath or shower are notifiable under Part P, so a registered electrician certifies them. New drainage or a new extractor where there was none can also be building regulations work; we tell you at the survey and handle the notification.
Is the survey free?
Yes. We visit, measure the room, check the pipework, drainage and electrics, and talk through what you want. You then get an itemised written quote, with no obligation to go ahead.