What does an en-suite cost in Derbyshire?
Our guide range in Derbyshire is £4,300–£8,600 including VAT. Prices in Derbyshire run at about 4% below the UK guide, based on East Midlands labour rates.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Derbyshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Derbyshire?
- Derby
- Chesterfield
- Long Eaton
- Ilkeston
- Swadlincote
- Staveley
- Belper
- Heanor
- Alfreton
- Dronfield
- Ripley
- Buxton
- New Mills
- Glossop
Supplies across most of Derbyshire are moderately hard. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Derby. Hardness varies street by street, so check the figure for your postcode with your water supplier. If you live in a Derby flat, check the lease before planning a new en-suite, as freeholder consent is often needed for new drainage and vents.
What the job includes
- Tiling, silicone, testing and making good on the bedroom side of any new walls
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
- IP-rated lighting, a shaver socket and the electrics done by a qualified electrician, tested and certified
- A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear
- A door that suits a tight space: inward, outward, sliding or a pocket door
Decisions to make first
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Noise
Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Refit or new en-suite
A refit keeps the existing drainage and walls. A new en-suite costs more because the walls, waste route, fan duct and electrics all start from nothing.
Rules that apply in England
Forming an en-suite inside an existing bedroom does not normally need planning permission, but it is usually building-regulations work because it adds drainage, ventilation and electrics. All wiring must meet BS 7671, with 30 mA RCD protection on every circuit in the room. A macerator or pumped WC is acceptable only where the home also has a WC on gravity drainage. In a listed building, a new soil or vent pipe through a wall needs listed building consent.
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.