- Postcode districts
- DE72, NG9, NG10
- Nearby
- Ilkeston, Nottingham and West Bridgford
- Guide price
- £4,300–£8,600
- Typical time on site
- 4–8 working days
- Water
- Moderately hard across most of Derbyshire
- Survey
- Free, at your home
What does an en-suite cost in Long Eaton?
For Long Eaton, our guide range for an en-suite is £4,300 to £8,600 including VAT. Prices in East Midlands run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Shower, basin and WC replaced
Upgrade
- Full-height porcelain tiling
New en-suite
- Formed inside an existing bedroom
Guide prices for Long Eaton including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Long Eaton
We cover every part of Long Eaton, including DE72, NG9 and NG10, and nearby Ilkeston (5.2 miles) and Nottingham (6.3 miles).
In Long Eaton, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. For an en-suite in Long Eaton, the first question at the survey is always where the waste can reach the soil stack. If your Long Eaton en-suite fan just blows into the loft, we can duct it properly to outside as part of the refit.
Most of Derbyshire has moderately hard water. A quick wipe of the glass and an easy-clean coating are worth having on a new shower in Long Eaton. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A short-projection or wall-hung WC and a compact basin chosen to keep the floor clear
- A door that suits a tight space: inward, outward, sliding or a pocket door
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- A pumped waste or macerator where gravity drainage is not possible, and only where the house already has a WC on gravity drainage
Decisions to make first
Noise
Acoustic insulation in the stud walls and a quiet fan make a real difference when one of you showers early while the other is still asleep.
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

