Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Derbyshire · DE72

Underfloor heating in Long Eaton

We handle underfloor heating for homeowners and landlords in Long Eaton, with the survey, products, strip-out, trades and fitting under one contract.

£650–£2,400 inc VAT1–2 working days (added to a fit)Free home survey
Electric underfloor heating mat laid before tiling, example for Long Eaton
Postcode districts
DE72, NG9, NG10
Nearby
Ilkeston, Nottingham and West Bridgford
Guide price
£650–£2,400
Typical time on site
1–2 working days (added to a fit)
Water
Moderately hard across most of Derbyshire
Survey
Free, at your home

What does bathroom underfloor heating cost in Long Eaton?

As a guide, budget £650 to £2,400 including VAT for bathroom underfloor heating in Long Eaton; your written quote will pin it down. Labour costs in East Midlands put local prices at about 4% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Electric, larger room

£1,150–£2,100
  • Whole floor coverage

Wet system

£1,450–£2,900
  • Manifold or single-zone kit

Guide prices for Long Eaton including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Long Eaton

We cover every part of Long Eaton, including DE72, NG9 and NG10, and nearby Ilkeston (5.2 miles) and Nottingham (6.3 miles).

In Long Eaton, as anywhere, the age of the house decides a lot: pipe sizes, floor construction and where the soil stack runs. If your Long Eaton home has a suspended timber floor, insulation boards under the mat stop heat disappearing into the void below. For Long Eaton homes having the bathroom floor replaced, underfloor heating adds one to two days to the fit.

Water across much of Derbyshire is moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • A check of the floor construction, the room's heat loss and where the thermostat and supply will go
  • Bringing the system up to temperature gradually once the adhesive and grout have cured
  • A dial, programmable or smart thermostat, with the supply RCD protected, tested and certified by a qualified electrician
  • The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit

Decisions to make first

Thermostat

A simple dial thermostat, a programmable one with set times, or a smart thermostat you can control from your phone.

Floor finish

Tiles and stone pass heat through well. LVT and vinyl can work, but check the maximum floor temperature the flooring maker allows.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Long Eaton: questions

What is the price of bathroom underfloor heating in Long Eaton?

Bathroom underfloor heating in Long Eaton usually costs £650–£2,400 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Is the water hard in Long Eaton?

Water across much of Derbyshire is moderately hard. Mid-tone grout and matt tiles hide the odd water mark better than dark grout and high gloss. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for bathroom underfloor heating in Long Eaton?

Building control for Long Eaton is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

How long does bathroom underfloor heating take?

Allow 1–2 working days (added to a fit) on site for most jobs, plus the lead time for products after you approve the quote. We give you a day-by-day plan before work starts in Long Eaton.

Does underfloor heating raise the floor height?

Yes, a little. An electric mat on an insulation board usually adds roughly 10 mm before the adhesive and tile, which matters at the door threshold. Wet systems in low-profile boards add more, and screeded systems more again.

Underfloor heating in Long Eaton

Book a free home survey in Long Eaton. You get a measured layout and an itemised written price before anything is ordered.