Underfloor heating in Nottingham

Postcode districts: NG1, NG3, NG5, NG6, NG7, NG8
Nearby: West Bridgford, Hucknall and Long Eaton
Guide price: £650–£2,400
Typical time on site: 1–2 working days (added to a fit)
Water: Hard across most of Nottinghamshire
Survey: Free, at your home

What does bathroom underfloor heating cost in Nottingham?

For Nottingham, our guide range for bathroom underfloor heating is £650 to £2,400 including VAT. Prices in East Midlands run at about 4% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.

Typical

Electric mat

£650–£1,450

Thermostat and RCD-protected supply

Electric, larger room

£1,150–£2,100

Whole floor coverage

Wet system

£1,450–£2,900

Manifold or single-zone kit

Guide prices for Nottingham including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Nottingham

We cover every part of Nottingham, including NG1, NG3, NG5 and 3 more postcode districts, and nearby West Bridgford (1.9 miles) and Hucknall (5.9 miles).

Nottingham is a big place with every kind of home, from terraces to flats to new builds, so we never price from a photo alone. Whether your Nottingham bathroom is a small en-suite or a large main bathroom, the mat is sized to the open floor, not the whole room. If your Nottingham bathroom has a cold tiled floor and no room for a bigger radiator, an electric mat under new tiles is the simplest answer.

Water across much of Nottinghamshire is hard. Hard water leaves white marks on dark grout and gloss tiles, so matt finishes and stain-resistant grout are the practical choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

A floor sensor set between the heating runs and wired back to the thermostat
Insulation boards over the subfloor, so heat goes up into the tiles rather than down into the joists or screed
The electric mat or cable laid to the open floor, kept clear of where the WC, bath and fixed furniture will sit
Bringing the system up to temperature gradually once the adhesive and grout have cured

Decisions to make first

Electric or wet

Electric is cheaper to install and quick to lay in one room. Wet costs more upfront but is usually cheaper to run where it is fed by a gas boiler or heat pump.

Thermostat

A simple dial thermostat, a programmable one with set times, or a smart thermostat you can control from your phone.

Rules that apply in England

In England, a new circuit for underfloor heating is notifiable under Part P, and so is connecting it to an existing circuit in a room with a bath or shower. The electrician either self-certifies through a competent person scheme or the work is notified to building control.

More about underfloor heating

Underfloor heating in Nottingham: questions

What is the price of bathroom underfloor heating in Nottingham?

Bathroom underfloor heating in Nottingham usually costs £650–£2,400 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Do you cover NG1 in Nottingham?

Yes. We cover all of Nottingham, including NG1, NG3, NG5, NG6 and 2 more postcode districts, and nearby West Bridgford, Hucknall and Long Eaton. Survey visits are free and arranged at a time that suits you.

Is the water hard in Nottingham?

Who handles building control for bathroom underfloor heating in Nottingham?

Building control for Nottingham is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

Is electric underfloor heating expensive to run in a bathroom?

Running cost depends on the heated area, the insulation under the mat, how long it runs and your electricity tariff. As an example, a 150 W per m² mat covering 3 m² draws 450 W, so two hours a day uses about 0.9 kWh. A timer and floor sensor stop it running when nobody is using the room.