What does a bath to shower conversion cost in Dumfries and Galloway?
Our guide range in Dumfries and Galloway is £1,900–£4,800 including VAT. Prices in Dumfries and Galloway run at about 4% below the UK guide, based on Scotland labour rates.
Tray and enclosure
- Thermostatic shower, re-tiling
Walk-in shower
- Large tray and frameless screen
Level-access floor
- Level entry, linear drain
Guide prices for Dumfries & Galloway including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Dumfries and Galloway?
Supplies across most of Dumfries and Galloway are soft. If that holds for your street in Dumfries, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. For Dumfries houses with only one bath, we talk through whether to keep it before you decide.
What the job includes
- A survey of the bath space, the waste position, the floor and your water system
- Grab rails and a fold-down seat if you want them
- Silicone, a full-flow test and a tidy finish where the new tiling meets the old
- A thermostatic shower valve, with the pipework moved for the new head position
- A low-profile tray, or a former and tanking for a level-access floor
- A glass enclosure, walk-in panel or frameless screen
Decisions to make first
How much to re-tile
Re-tile just the shower walls, or take the chance to re-tile the whole room so new and old tiles never have to match.
Enclosure or walk-in
An enclosure with a door keeps all the water in and suits a shorter space. A walk-in panel makes the most of the full 1700 mm length an old bath leaves.
Mixer or electric shower
A thermostatic mixer draws on your hot-water system. An electric shower heats cold mains water as it flows and needs its own circuit.
Safety extras
A fold-down seat, grab rails and a slip-resistant tray cost little at the time of fitting and are much harder to add later.
Rules that apply in Scotland
Converting a bath to a shower does not need planning permission. The shower area is a special location under BS 7671, with 30 mA RCD protection on every circuit and at least IPX4 fittings in zone 1 above the tray up to 2.25 m. A shower pump can only be used on a gravity system with a cold tank, never on the mains. Where the conversion adapts the home for a disabled person, the work can be zero-rated for VAT under HMRC VAT Notice 701/7.
In Scotland, a bath to shower swap in the same position rarely needs a building warrant, but a level-access floor that alters drainage or structure may. For adaptation help, councils run a Scheme of Assistance rather than Disabled Facilities Grants.