What does a bath to shower conversion cost in Fife?
Our guide range in Fife is £1,900–£4,800 including VAT. Prices in Fife run at about 4% below the UK guide, based on Scotland labour rates.
Tray and enclosure
- Bath removed, tray in its place
Walk-in shower
- Concealed valve, rainfall head
Level-access floor
- Grab rails and seat options
Guide prices for Fife including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Fife?
Most of Fife is supplied with soft water. If that holds for your street in Dunfermline, limescale on shower glass and heads builds up slowly and a squeegee after use is usually enough. Hardness varies street by street, so check the figure for your postcode with your water supplier. If someone in your Dunfermline home is finding the bath side harder to step over, a low or level-access tray removes the problem.
What the job includes
- Boarding, tanking and re-tiling of the shower walls
- Removal of the bath, panel and taps, and disposal of the waste
- Silicone, a full-flow test and a tidy finish where the new tiling meets the old
- A glass enclosure, walk-in panel or frameless screen
- A thermostatic shower valve, with the pipework moved for the new head position
- Repair or replacement of floorboards where the bath has left them soft or damaged
Decisions to make first
Safety extras
A fold-down seat, grab rails and a slip-resistant tray cost little at the time of fitting and are much harder to add later.
Enclosure or walk-in
An enclosure with a door keeps all the water in and suits a shorter space. A walk-in panel makes the most of the full 1700 mm length an old bath leaves.
How much to re-tile
Re-tile just the shower walls, or take the chance to re-tile the whole room so new and old tiles never have to match.
Low tray or level floor
A low-profile tray has a small lip. A level-access floor removes the step altogether but needs a former, tanking and a linear drain.
Rules that apply in Scotland
Converting a bath to a shower does not need planning permission. The shower area is a special location under BS 7671, with 30 mA RCD protection on every circuit and at least IPX4 fittings in zone 1 above the tray up to 2.25 m. A shower pump can only be used on a gravity system with a cold tank, never on the mains. Where the conversion adapts the home for a disabled person, the work can be zero-rated for VAT under HMRC VAT Notice 701/7.
In Scotland, a bath to shower swap in the same position rarely needs a building warrant, but a level-access floor that alters drainage or structure may. For adaptation help, councils run a Scheme of Assistance rather than Disabled Facilities Grants.