What does a bath to shower conversion cost in West Sussex?
Our guide range in West Sussex is £2,200–£5,600 including VAT. Prices in West Sussex run at about 12% above the UK guide, based on South East England labour rates.
Tray and enclosure
- Thermostatic shower, re-tiling
Walk-in shower
- Large tray and frameless screen
Level-access floor
- Level entry, linear drain
Guide prices for West Sussex including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in West Sussex?
- Crawley
- Worthing
- Bognor Regis
- Littlehampton
- Horsham
- Haywards Heath
- Chichester
- Burgess Hill
- East Grinstead
- Shoreham-by-Sea
- Emsworth
- Lancing
Most of West Sussex has hard water. If your supply in Crawley is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If someone in your Crawley home is finding the bath side harder to step over, a low or level-access tray removes the problem.
What the job includes
- Repair or replacement of floorboards where the bath has left them soft or damaged
- A low-profile tray, or a former and tanking for a level-access floor
- A thermostatic shower valve, with the pipework moved for the new head position
- A glass enclosure, walk-in panel or frameless screen
- Removal of the bath, panel and taps, and disposal of the waste
- Grab rails and a fold-down seat if you want them
Decisions to make first
Enclosure or walk-in
An enclosure with a door keeps all the water in and suits a shorter space. A walk-in panel makes the most of the full 1700 mm length an old bath leaves.
Low tray or level floor
A low-profile tray has a small lip. A level-access floor removes the step altogether but needs a former, tanking and a linear drain.
Safety extras
A fold-down seat, grab rails and a slip-resistant tray cost little at the time of fitting and are much harder to add later.
How much to re-tile
Re-tile just the shower walls, or take the chance to re-tile the whole room so new and old tiles never have to match.
Rules that apply in England
Converting a bath to a shower does not need planning permission. The shower area is a special location under BS 7671, with 30 mA RCD protection on every circuit and at least IPX4 fittings in zone 1 above the tray up to 2.25 m. A shower pump can only be used on a gravity system with a cold tank, never on the mains. Where the conversion adapts the home for a disabled person, the work can be zero-rated for VAT under HMRC VAT Notice 701/7.
In England, adding an electric shower usually means a new circuit, which is notifiable under Part P, as is any change to the wiring in the bathroom. Where the conversion is an adaptation for a disabled person, a Disabled Facilities Grant of up to £30,000 may help, but the council must approve it before work starts.