What does a bath to shower conversion cost in Surrey?
Our guide range in Surrey is £2,200–£5,600 including VAT. Prices in Surrey run at about 12% above the UK guide, based on South East England labour rates.
Tray and enclosure
- Bath removed, tray in its place
Walk-in shower
- Concealed valve, rainfall head
Level-access floor
- Grab rails and seat options
Guide prices for Surrey including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Surrey?
- Woking
- Guildford
- Esher
- Redhill
- Staines
- Banstead
- Leatherhead
- Ewell
- Farnham
- Epsom
- Camberley
- Egham
- Sunbury-on-Thames
- Ashford
- Walton-on-Thames
- Godalming
- Reigate
- Horley
- Caterham
- Weybridge
- West Molesey
- East Molesey
- Dorking
- Haslemere
- Cobham
- Chertsey
Water across much of Surrey is hard. If your supply in Woking is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. If the bath in your Woking home is mainly used for storing things, a walk-in shower in the same space is a quick, contained job.
What the job includes
- Removal of the bath, panel and taps, and disposal of the waste
- A low-profile tray, or a former and tanking for a level-access floor
- Boarding, tanking and re-tiling of the shower walls
- A glass enclosure, walk-in panel or frameless screen
- A survey of the bath space, the waste position, the floor and your water system
- Grab rails and a fold-down seat if you want them
Decisions to make first
Safety extras
A fold-down seat, grab rails and a slip-resistant tray cost little at the time of fitting and are much harder to add later.
Low tray or level floor
A low-profile tray has a small lip. A level-access floor removes the step altogether but needs a former, tanking and a linear drain.
How much to re-tile
Re-tile just the shower walls, or take the chance to re-tile the whole room so new and old tiles never have to match.
Mixer or electric shower
A thermostatic mixer draws on your hot-water system. An electric shower heats cold mains water as it flows and needs its own circuit.
Rules that apply in England
Converting a bath to a shower does not need planning permission. The shower area is a special location under BS 7671, with 30 mA RCD protection on every circuit and at least IPX4 fittings in zone 1 above the tray up to 2.25 m. A shower pump can only be used on a gravity system with a cold tank, never on the mains. Where the conversion adapts the home for a disabled person, the work can be zero-rated for VAT under HMRC VAT Notice 701/7.
In England, adding an electric shower usually means a new circuit, which is notifiable under Part P, as is any change to the wiring in the bathroom. Where the conversion is an adaptation for a disabled person, a Disabled Facilities Grant of up to £30,000 may help, but the council must approve it before work starts.