What does a bath to shower conversion cost in Hampshire?
Our guide range in Hampshire is £2,200–£5,600 including VAT. Prices in Hampshire run at about 12% above the UK guide, based on South East England labour rates.
Tray and enclosure
- Glass enclosure or walk-in panel
Walk-in shower
- Full-height tiling
Level-access floor
- Floor former and tanking
Guide prices for Hampshire including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Hampshire?
- Southampton
- Portsmouth
- Basingstoke
- Gosport
- Waterlooville
- Farnborough
- Eastleigh
- Winchester
- Havant
- Andover
- Fareham
- Aldershot
- Fleet
- Totton
- New Milton
- Bordon
- Hythe
- Yateley
- Alton
- Southsea
- Hedge End
- Romsey
- Hayling Island
- Tadley
- South Hayling
Most of Hampshire has hard water. If your supply in Southampton is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier. We check the floor under the bath during a Southampton survey where we can, because old leaks can leave soft boards.
What the job includes
- Removal of the bath, panel and taps, and disposal of the waste
- Grab rails and a fold-down seat if you want them
- A low-profile tray, or a former and tanking for a level-access floor
- A glass enclosure, walk-in panel or frameless screen
- A thermostatic shower valve, with the pipework moved for the new head position
- Boarding, tanking and re-tiling of the shower walls
Decisions to make first
How much to re-tile
Re-tile just the shower walls, or take the chance to re-tile the whole room so new and old tiles never have to match.
Your only bath?
If this is the only bath in the house, think about whether you, or a future buyer, will want one before you commit.
Safety extras
A fold-down seat, grab rails and a slip-resistant tray cost little at the time of fitting and are much harder to add later.
Enclosure or walk-in
An enclosure with a door keeps all the water in and suits a shorter space. A walk-in panel makes the most of the full 1700 mm length an old bath leaves.
Rules that apply in England
Converting a bath to a shower does not need planning permission. The shower area is a special location under BS 7671, with 30 mA RCD protection on every circuit and at least IPX4 fittings in zone 1 above the tray up to 2.25 m. A shower pump can only be used on a gravity system with a cold tank, never on the mains. Where the conversion adapts the home for a disabled person, the work can be zero-rated for VAT under HMRC VAT Notice 701/7.
In England, adding an electric shower usually means a new circuit, which is notifiable under Part P, as is any change to the wiring in the bathroom. Where the conversion is an adaptation for a disabled person, a Disabled Facilities Grant of up to £30,000 may help, but the council must approve it before work starts.