Bathroom lighting in Dumfries and Galloway

What does new bathroom lighting cost in Dumfries and Galloway?

Our guide range in Dumfries and Galloway is £350–£1,150 including VAT. Prices in Dumfries and Galloway run at about 4% below the UK guide, based on Scotland labour rates.

Guide prices for Dumfries & Galloway including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in Dumfries and Galloway?

• Dumfries
• Stranraer
• Annan
• Locharbriggs

Water across much of Dumfries and Galloway is soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. For Dumfries homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in.

What the job includes

• Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
• A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
• RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
• A shaver supply unit where wanted, positioned away from direct spray
• Cable runs to each fitting, from the loft above or through the ceiling
• IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower

Decisions to make first

Integrated or replaceable LED

Integrated LED downlights are slimmer and fully sealed. Fittings with replaceable lamps let you change brightness or colour later.

Feature lighting

LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.

Switching

A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.

Mirror lighting

An illuminated mirror or mirror cabinet lights the face from the front, which a ceiling light cannot do. Many include a demister pad and a shaver socket.

Rules that apply in Scotland

BS 7671 sets the rules for bathroom electrics across the UK. Every circuit in a room with a bath or shower needs 30 mA RCD protection. Zone 0 is inside the bath or shower tray and needs IPX7 fittings; zone 1 is above it up to 2.25 m and needs at least IPX4, or IPX5 where water jets are used; zone 2 extends 0.6 m out from zone 1, where IPX4 is recommended. Sockets other than shaver supply units must be at least 3 m from the zone 1 boundary.

Scotland has no Part P. Bathroom lighting must meet the building standards and BS 7671, including RCD protection and the zone rules, and small like-for-like work does not normally need a building warrant.