What does new bathroom lighting cost in Greater Glasgow?
Our guide range in Greater Glasgow is £350–£1,150 including VAT. Prices in Greater Glasgow run at about 4% below the UK guide, based on Scotland labour rates.
Essential
- IP-rated LED downlights
Layered
- Shaver socket
Feature
- Dimming and sensors
Guide prices for Greater Glasgow including VAT. Your itemised written quote after the free survey is the price that counts.
Which towns do we cover in Greater Glasgow?
Water across much of Greater Glasgow is soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. Landlords in Glasgow get an electrical certificate for new bathroom lighting, which belongs with the property's safety records.
What the job includes
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
- Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
- Cable runs to each fitting, from the loft above or through the ceiling
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
Decisions to make first
Colour temperature
Warm white, around 3000 K, feels softer; cool white, around 4000 K, is crisper for shaving and make-up. Mixing the two in one room looks uneven.
Mirror lighting
An illuminated mirror or mirror cabinet lights the face from the front, which a ceiling light cannot do. Many include a demister pad and a shaver socket.
Feature lighting
LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.
Integrated or replaceable LED
Integrated LED downlights are slimmer and fully sealed. Fittings with replaceable lamps let you change brightness or colour later.
Rules that apply in Scotland
BS 7671 sets the rules for bathroom electrics across the UK. Every circuit in a room with a bath or shower needs 30 mA RCD protection. Zone 0 is inside the bath or shower tray and needs IPX7 fittings; zone 1 is above it up to 2.25 m and needs at least IPX4, or IPX5 where water jets are used; zone 2 extends 0.6 m out from zone 1, where IPX4 is recommended. Sockets other than shaver supply units must be at least 3 m from the zone 1 boundary.
Scotland has no Part P. Bathroom lighting must meet the building standards and BS 7671, including RCD protection and the zone rules, and small like-for-like work does not normally need a building warrant.