Bathroom lighting in the Forth Valley

What does new bathroom lighting cost in the Forth Valley?

Our guide range in the Forth Valley is £350–£1,150 including VAT. Prices in the Forth Valley run at about 4% below the UK guide, based on Scotland labour rates.

Guide prices for Forth Valley including VAT. Your itemised written quote after the free survey is the price that counts.

Which towns do we cover in the Forth Valley?

• Stirling
• Falkirk
• Alloa
• Grangemouth

Water across much of the Forth Valley is soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier. Bathroom lighting in Stirling is wired to BS 7671 with RCD protection, tested, and certified when it is finished.

What the job includes

• Testing and an electrical certificate for the work on completion
• A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
• Fire-rated downlights or fire hoods where the ceiling has to keep its fire resistance
• RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
• A shaver supply unit where wanted, positioned away from direct spray
• IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower

Decisions to make first

Feature lighting

LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.

Downlight positions

Evenly spaced downlights give flat, general light. Placing one over the shower and one over the basin puts the light where you actually use it.

Integrated or replaceable LED

Integrated LED downlights are slimmer and fully sealed. Fittings with replaceable lamps let you change brightness or colour later.

Mirror lighting

An illuminated mirror or mirror cabinet lights the face from the front, which a ceiling light cannot do. Many include a demister pad and a shaver socket.

Rules that apply in Scotland

BS 7671 sets the rules for bathroom electrics across the UK. Every circuit in a room with a bath or shower needs 30 mA RCD protection. Zone 0 is inside the bath or shower tray and needs IPX7 fittings; zone 1 is above it up to 2.25 m and needs at least IPX4, or IPX5 where water jets are used; zone 2 extends 0.6 m out from zone 1, where IPX4 is recommended. Sockets other than shaver supply units must be at least 3 m from the zone 1 boundary.

Scotland has no Part P. Bathroom lighting must meet the building standards and BS 7671, including RCD protection and the zone rules, and small like-for-like work does not normally need a building warrant.