- Postcode districts
- N9, N18, N21
- Nearby
- Tottenham, Enfield and Chingford
- Guide price
- £450–£1,500
- Typical time on site
- half a day to 2 days
- Water
- Very hard across most of Greater London
- Survey
- Free, at your home
What does new bathroom lighting cost in Edmonton?
As a guide, budget £450 to £1,500 including VAT for new bathroom lighting in Edmonton; your written quote will pin it down. Prices in London run at about 25% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Essential
- Testing and certificate
Layered
- Downlights plus mirror or vanity light
Feature
- Illuminated mirror cabinet
Guide prices for Edmonton including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Edmonton
As well as Edmonton itself (N9, N18 and N21), we survey in Tottenham, Enfield and Chingford.
London homes in Edmonton often mean stairs, permits and neighbours below; we plan the logistics as carefully as the bathroom. If you are refitting a windowless bathroom in Edmonton, the lighting is planned with the extractor fan so the two work together. For Edmonton homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in.
Most of Greater London has very hard water. We plan easy-clean glass, rimless toilets and finishes that do not show limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Cable runs to each fitting, from the loft above or through the ceiling
- A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights
- IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
- A lighting plan: number and position of downlights, mirror lighting, switches and any shaver socket
Decisions to make first
Integrated or replaceable LED
Integrated LED downlights are slimmer and fully sealed. Fittings with replaceable lamps let you change brightness or colour later.
Switching
A pull-cord inside, a switch outside the door or a motion sensor. Dimmers need LED fittings that are compatible with them.
Rules that apply in England
In England, Part P makes a new circuit, a consumer unit replacement and any addition or alteration to circuits in a room with a bath or shower notifiable. The work must be done by an electrician registered with a competent person scheme or notified to building control. Replacing a light fitting like for like is not usually notifiable, but it still has to meet BS 7671.

