Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Lanarkshire · G74

Bathroom lighting in East Kilbride

We cover bathroom lighting in East Kilbride and the rest of Lanarkshire. Every job starts with a measured survey at your home and a written price before anything is ordered.

£350–£1,150 inc VAThalf a day to 2 daysFree home survey
Bathroom with IP-rated downlights and an illuminated mirror, example for East Kilbride
Postcode districts
G74
Nearby
Cambuslang, Blantyre and Rutherglen
Guide price
£350–£1,150
Typical time on site
half a day to 2 days
Water
Soft across most of Lanarkshire
Survey
Free, at your home

What does new bathroom lighting cost in East Kilbride?

Our guide price for new bathroom lighting in East Kilbride is £350–£1,150 including VAT. We adjust the national guide for Scotland, where prices are typically about 4% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Layered

£600–£1,150
  • Downlights plus mirror or vanity light

Feature

£950–£1,900
  • Illuminated mirror cabinet

Guide prices for East Kilbride including VAT. Your itemised written quote after the free survey is the price that counts.

Working in East Kilbride

We cover every part of East Kilbride, including G74, and nearby Cambuslang (3.2 miles) and Blantyre (3.9 miles).

East Kilbride has a wide mix of house ages, so the survey is where we spot old lead pipework, weak joists or a tight soil stack. Bathroom lighting in East Kilbride is wired to BS 7671 with RCD protection, tested, and certified when it is finished. For East Kilbride homes with a loft above the bathroom, the insulation and fire protection are checked before any downlights are cut in.

Supplies across most of Lanarkshire are soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • RCD protection on the lighting circuit, checked at the consumer unit and added where it is missing
  • IP-rated fittings chosen for each zone, with IP65 downlights over the bath or shower
  • Cable runs to each fitting, from the loft above or through the ceiling
  • A ceiling pull-cord or a switch outside the room, with separate switching for mirror and feature lights

Decisions to make first

Feature lighting

LED strips in niches, under a wall-hung vanity or along a plinth give enough light for night-time without full glare.

Mirror lighting

An illuminated mirror or mirror cabinet lights the face from the front, which a ceiling light cannot do. Many include a demister pad and a shaver socket.

Rules that apply in Scotland

Scotland has no Part P. Bathroom lighting must meet the building standards and BS 7671, including RCD protection and the zone rules, and small like-for-like work does not normally need a building warrant.

More about bathroom lighting

Bathroom lighting in East Kilbride: questions

What is the price of new bathroom lighting in East Kilbride?

New bathroom lighting in East Kilbride usually costs £350–£1,150 including VAT. Expect the lower end for a like-for-like job with standard products, and the upper end if things move or you choose premium finishes. Your quote is itemised and fixed in writing once agreed.

Do you cover G74 in East Kilbride?

Yes. We cover all of East Kilbride, including G74, and nearby Cambuslang, Blantyre and Rutherglen. Survey visits are free and arranged at a time that suits you.

Is the water hard in East Kilbride?

Supplies across most of Lanarkshire are soft. That leaves you free to choose matt black, brushed brass or clear glass without worrying much about limescale. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Will new bathroom lighting in East Kilbride need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

What IP rating do bathroom lights need?

It depends on the zone. Lights inside the bath or shower tray (zone 0) need IPX7; above the bath or shower up to 2.25 m (zone 1) they need at least IPX4, or IPX5 where water jets are used; within 0.6 m of that (zone 2) IPX4 is recommended. Many electricians fit IP65 downlights over a shower whatever the ceiling height. See our bathroom zones guide.

Bathroom lighting in East Kilbride

Book a free home survey in East Kilbride. You get a measured layout and an itemised written price before anything is ordered.