- Postcode districts
- L20, L21, L22, L30, L37, L38 + 2 more
- Nearby
- Formby, Lytham St Annes and Ormskirk
- Guide price
- £550–£3,800
- Typical time on site
- 1–5 working days
- Water
- Soft across most of Merseyside
- Survey
- Free, at your home
What does bathroom plumbing work cost in Southport?
Our guide price for bathroom plumbing work in Southport is £550–£3,800 including VAT. Labour costs in North West England put local prices at about 6% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.
Like-for-like
- Isolation valves, new tails
Partial re-route
- Waste re-routed
New layout
- WC moved on the soil stack
Guide prices for Southport including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Southport
We work right across Southport — L20, L21, L22 and 5 more postcode districts — and in neighbouring Formby and Lytham St Annes.
Across a large town like Southport, homes range from older terraces to newer estates; the survey tells us which pipework and floor we are dealing with. In Southport flats, any change to the WC or wastes is planned with the lease and the flat below in mind. If your Southport water is hard, a scale reducer or softener on the bathroom supplies can protect valves and shower heads.
Supplies across most of Merseyside are soft. In soft water, taps, wastes and toilet pans scale up slowly, so brushed and matt finishes are a safe choice. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Shower pumps on gravity systems, and macerators or pumped wastes where gravity drainage cannot reach
- New hot and cold pipework in copper or plastic, properly clipped, and insulated where it runs through cold spaces
- The WC connected to the soil stack, or a new branch where the WC is moving
- Basin, bath and shower wastes sized and laid to a steady fall, with traps that hold their water seal
Decisions to make first
Hard water
In hard water areas, a scale reducer or water softener protects valves, shower heads and glass. Keep an unsoftened tap in the kitchen for drinking.
Shower supply
Combi boilers and unvented cylinders give mains pressure. A gravity system with a cold tank may need a pump, but a pump must never be connected to the mains.
Rules that apply in England
In England, the Water Supply (Water Fittings) Regulations 1999 apply. New drainage or a new connection to the soil stack can be building regulations work under Part H, and a macerator or pumped WC is acceptable only where there is also a WC on gravity drainage elsewhere in the home.
