Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
Aberdeen & Aberdeenshire · AB10

Extractor fans & ventilation in Aberdeen

We handle extractor fans & ventilation for homeowners and landlords in Aberdeen, with the survey, products, strip-out, trades and fitting under one contract.

£240–£600 inc VAThalf a dayFree home survey
Bathroom extractor fan fitted in the ceiling, example for Aberdeen
Postcode districts
AB10, AB11, AB12, AB15, AB16, AB23 + 2 more
Nearby
Inverurie, Peterhead and Fraserburgh
Guide price
£240–£600
Typical time on site
half a day
Water
Soft across most of Aberdeen and Aberdeenshire
Survey
Free, at your home

What does a bathroom extractor fan cost in Aberdeen?

Our guide price for a bathroom extractor fan in Aberdeen is £240–£600 including VAT. We adjust the national guide for Scotland, where prices are typically about 4% below the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.

Inline fan

£400–£650
  • Quiet fan in the loft void

Continuous extract

£450–£850
  • Boost on humidity

Guide prices for Aberdeen including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Aberdeen

We cover every part of Aberdeen, including AB10, AB11, AB12 and 5 more postcode districts, and nearby Inverurie (14.3 miles) and Peterhead (27.6 miles).

In a city the size of Aberdeen, parking and access for a skip are worth sorting before the start date — we will ask at the survey. In Aberdeen flats, a new vent through an outside wall may need agreement from the other owners or the factor, so we raise it at the survey. If your Aberdeen bathroom has black mould on the ceiling or silicone, the fan and its duct are the first things we check.

Supplies across most of Aberdeen and Aberdeenshire are soft. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Making good around the fan and checking that it extracts properly at the grille
  • Run-on timer, humidistat or light-linked switching set up to suit how the room is used
  • Rigid or semi-rigid ducting kept short and straight, and insulated where it crosses a cold loft
  • A backdraught shutter and external grille, so cold air does not blow back in

Decisions to make first

Intermittent or continuous

An intermittent fan runs during and after use. A continuous fan runs quietly all the time at a low rate and boosts when humidity rises.

Replacement air

A fan needs air to replace what it removes, so leave a gap of around 10 mm under the door or fit a door grille. A sealed room starves the fan.

Rules that apply in Scotland

In Scotland, the Technical Handbook also uses 15 l/s extract for a bathroom. A replacement fan rarely needs a building warrant, but forming a new bathroom may.

More about extractor fans & ventilation

Extractor fans & ventilation in Aberdeen: questions

How much should I budget for a bathroom extractor fan in Aberdeen?

A bathroom extractor fan in Aberdeen usually costs £240–£600 including VAT. The final figure comes down to what you choose and what we find at the survey; your written quote lists every item so you can see where the money goes.

Do you cover AB10 in Aberdeen?

Yes. We cover all of Aberdeen, including AB10, AB11, AB12, AB15 and 4 more postcode districts, and nearby Inverurie, Peterhead and Fraserburgh. Survey visits are free and arranged at a time that suits you.

Is the water hard in Aberdeen?

Supplies across most of Aberdeen and Aberdeenshire are soft. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Will a bathroom extractor fan in Aberdeen need a building warrant?

Usually not for a straight refit. Building warrants are issued by the local council's building standards service, and forming a new bathroom, changing drainage or structural work can need one. We tell you at the survey and handle the application if one is needed.

What extraction rate does a bathroom fan need?

In England, Approved Document F asks for 15 litres per second from an intermittent bathroom fan, or 8 litres per second from a continuous one. Scotland's Technical Handbook also uses 15 l/s for a bathroom, Wales has similar rates in its own Part F, and Northern Ireland sets its rates in Technical Booklet K. Choose a fan that reaches the rate through your actual duct run, not just in open air. Our extractor fan rules guide explains more.

Extractor fans & ventilation in Aberdeen

Book a free home survey in Aberdeen. You get a measured layout and an itemised written price before anything is ordered.