- Postcode districts
- L26
- Nearby
- Speke, Hunts Cross and Allerton
- Guide price
- £235–£550
- Typical time on site
- half a day
- Water
- Soft across most of Merseyside
- Survey
- Free, at your home
What does a bathroom extractor fan cost in Halewood?
Our guide price for a bathroom extractor fan in Halewood is £235–£550 including VAT. Prices in North West England run at about 6% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Extractor fan
- Fan with timer or humidistat
Inline fan
- Ducting to a roof or soffit vent
Continuous extract
- Good for windowless rooms
Guide prices for Halewood including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Halewood
We cover every part of Halewood, including L26, and nearby Speke (1.4 miles) and Hunts Cross (1.4 miles).
Halewood gets the same process as anywhere else: a free survey at your home and a written, itemised quote. If your Halewood home is listed or in a period terrace, a fan ducted through the loft to a roof vent can avoid a new hole in the front wall, though consent may still apply. We check the duct route at Halewood surveys, because a short, straight run to outside matters more than the fan's headline figure.
Most of Merseyside is supplied with soft water. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A fan chosen to meet the bathroom extract rate: 15 l/s intermittent or 8 l/s continuous
- Rigid or semi-rigid ducting kept short and straight, and insulated where it crosses a cold loft
- Core-drilling through the wall, or ducting through the loft to a roof or soffit vent
- A backdraught shutter and external grille, so cold air does not blow back in
Decisions to make first
Noise
Compare the stated noise level in decibels. Inline fans and low-speed continuous fans are much quieter in the room than budget axial fans.
Replacement air
A fan needs air to replace what it removes, so leave a gap of around 10 mm under the door or fit a door grille. A sealed room starves the fan.
Rules that apply in England
In England, Approved Document F sets bathroom extract at 15 l/s for an intermittent fan or 8 l/s for continuous extract. Wiring a new fan alters a circuit in a room with a bath or shower, so it is notifiable under Part P.
