Free home survey & written quote · Fitted bathrooms across England, Wales, Scotland & Northern Ireland0800 088 6341
Fitted Bathrooms
West Yorkshire · LS1

Extractor fans & ventilation in Leeds

We handle extractor fans & ventilation for homeowners and landlords in Leeds, with the survey, products, strip-out, trades and fitting under one contract.

£230–£550 inc VAThalf a dayFree home survey
Bathroom extractor fan fitted in the ceiling, example for Leeds
Postcode districts
LS1, LS2, LS3, LS4, LS5, LS6 + 13 more
Nearby
Batley, Dewsbury and Wakefield
Guide price
£230–£550
Typical time on site
half a day
Water
Soft across most of West Yorkshire
Survey
Free, at your home

What does a bathroom extractor fan cost in Leeds?

As a guide, budget £230 to £550 including VAT for a bathroom extractor fan in Leeds; your written quote will pin it down. Labour costs in Yorkshire and the Humber put local prices at about 7% below the UK guide figure. The figure depends on the size of the room, whether anything moves, and the products you pick.

Inline fan

£350–£650
  • Grille in the ceiling

Continuous extract

£400–£850
  • Low-energy fan running all the time

Guide prices for Leeds including VAT. Your itemised written quote after the free survey is the price that counts.

Working in Leeds

We cover every part of Leeds, including LS1, LS2, LS3 and 16 more postcode districts, and nearby Batley (7.4 miles) and Dewsbury (8 miles).

In a city the size of Leeds, parking and access for a skip are worth sorting before the start date — we will ask at the survey. For windowless bathrooms in Leeds homes, continuous extract that boosts on humidity often works better than a fan tied to the light switch. In Leeds flats, a new vent through an outside wall may need freeholder consent, so we raise it at the survey.

Supplies across most of West Yorkshire are soft. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

What the job includes

  • Run-on timer, humidistat or light-linked switching set up to suit how the room is used
  • A fan chosen to meet the bathroom extract rate: 15 l/s intermittent or 8 l/s continuous
  • A check of the room, any existing fan or vent, and the shortest route to the outside
  • Rigid or semi-rigid ducting kept short and straight, and insulated where it crosses a cold loft

Decisions to make first

Axial, centrifugal or inline

Axial fans suit short, straight runs; centrifugal fans cope better with longer ducts; inline fans sit in the loft and are the quietest in the room.

Noise

Compare the stated noise level in decibels. Inline fans and low-speed continuous fans are much quieter in the room than budget axial fans.

Rules that apply in England

In England, Approved Document F sets bathroom extract at 15 l/s for an intermittent fan or 8 l/s for continuous extract. Wiring a new fan alters a circuit in a room with a bath or shower, so it is notifiable under Part P.

More about extractor fans & ventilation

Extractor fans & ventilation in Leeds: questions

How much should I budget for a bathroom extractor fan in Leeds?

A bathroom extractor fan in Leeds usually costs £230–£550 including VAT. Where you land in that range depends on the size of the room, whether the layout changes and the products you choose. After the free survey you get an itemised written quote, and the price is fixed in writing once the layout and products are agreed.

Do you cover LS1 in Leeds?

Yes. We cover all of Leeds, including LS1, LS2, LS3, LS4 and 15 more postcode districts, and nearby Batley, Dewsbury and Wakefield. Survey visits are free and arranged at a time that suits you.

Is the water hard in Leeds?

Supplies across most of West Yorkshire are soft. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.

Who handles building control for a bathroom extractor fan in Leeds?

Building control for Leeds is handled by the local council or an approved inspector. If your job needs sign-off — for example a new circuit, new drainage or a new extractor where there was none — we tell you at the survey and handle the notification as part of the work.

What extraction rate does a bathroom fan need?

In England, Approved Document F asks for 15 litres per second from an intermittent bathroom fan, or 8 litres per second from a continuous one. Scotland's Technical Handbook also uses 15 l/s for a bathroom, Wales has similar rates in its own Part F, and Northern Ireland sets its rates in Technical Booklet K. Choose a fan that reaches the rate through your actual duct run, not just in open air. Our extractor fan rules guide explains more.

Extractor fans & ventilation in Leeds

Book a free home survey in Leeds. You get a measured layout and an itemised written price before anything is ordered.