- Postcode districts
- LS11, LS27, WF17
- Nearby
- Batley, Dewsbury and Heckmondwike
- Guide price
- £230–£550
- Typical time on site
- half a day
- Water
- Soft across most of West Yorkshire
- Survey
- Free, at your home
What does a bathroom extractor fan cost in Morley?
Our guide price for a bathroom extractor fan in Morley is £230–£550 including VAT. Prices in Yorkshire and the Humber run at about 7% below the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Extractor fan
- Wired to regulations
Inline fan
- Quiet fan in the loft void
Continuous extract
- Boost on humidity
Guide prices for Morley including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Morley
We cover every part of Morley, including LS11, LS27 and WF17, and nearby Batley (2.9 miles) and Dewsbury (3.6 miles).
Homes in and around Morley vary, so we look at the floor, the walls and the water system before we price anything. If your Morley bathroom has black mould on the ceiling or silicone, the fan and its duct are the first things we check. If your Morley home is listed or in a period terrace, a fan ducted through the loft to a roof vent can avoid a new hole in the front wall, though consent may still apply.
Water across much of West Yorkshire is soft. Even so, condensation is the bigger problem in any bathroom, and a properly sized extractor is what deals with it. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A check of the room, any existing fan or vent, and the shortest route to the outside
- Wiring by a qualified electrician, with an isolator outside the room and RCD protection
- A fan chosen to meet the bathroom extract rate: 15 l/s intermittent or 8 l/s continuous
- Rigid or semi-rigid ducting kept short and straight, and insulated where it crosses a cold loft
Decisions to make first
Axial, centrifugal or inline
Axial fans suit short, straight runs; centrifugal fans cope better with longer ducts; inline fans sit in the loft and are the quietest in the room.
Replacement air
A fan needs air to replace what it removes, so leave a gap of around 10 mm under the door or fit a door grille. A sealed room starves the fan.
Rules that apply in England
In England, Approved Document F sets bathroom extract at 15 l/s for an intermittent fan or 8 l/s for continuous extract. Wiring a new fan alters a circuit in a room with a bath or shower, so it is notifiable under Part P.
