- Postcode districts
- EN7, EN8, EN9
- Nearby
- Waltham Abbey, Enfield and Hoddesdon
- Guide price
- £4,800–£9,500
- Typical time on site
- 4–8 working days
- Water
- Very hard across most of Hertfordshire
- Survey
- Free, at your home
What does an en-suite cost in Cheshunt?
For Cheshunt, our guide range for an en-suite is £4,800 to £9,500 including VAT. Prices in East of England run at about 6% above the national guide, mainly because of labour rates. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Existing en-suite, same layout
Upgrade
- Fitted furniture with storage
New en-suite
- Ventilation and electrics to regulations
Guide prices for Cheshunt including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Cheshunt
We cover every part of Cheshunt, including EN7, EN8 and EN9, and nearby Waltham Abbey (1.4 miles) and Enfield (4.1 miles).
Homes in and around Cheshunt vary, so we look at the floor, the walls and the water system before we price anything. If the en-suite in your Cheshunt home was squeezed in by a previous owner, a refit is a chance to fix the door swing and the tray size. If you live in a Cheshunt flat, check the lease before planning a new en-suite, as freeholder consent is often needed for new drainage and vents.
Most of Hertfordshire has very hard water. If your supply in Cheshunt is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- Tiling, silicone, testing and making good on the bedroom side of any new walls
- An extractor fan ducted to outside, sized to the room and wired with an overrun timer or humidistat
- A survey that traces the route from the en-suite to the soil stack and checks the fall the waste pipes would need
- Stud walls with acoustic insulation and moisture-resistant board for a new en-suite
Decisions to make first
Exposed or concealed valve
An exposed bar valve is quicker to fit and easy to service. A concealed valve looks cleaner but sits inside the wall, so plan how it will be reached for repairs.
Shower size
A 900 mm square tray is a comfortable minimum for an enclosure. In a long, narrow room, a 1200 by 800 mm walk-in tray with one glass panel feels far more generous.
Rules that apply in England
In England, a new en-suite brings in Part H for the new connection to the soil stack, Approved Document F for ventilation, at 15 litres per second intermittent or 8 litres per second continuous extract, and Part P for the new circuits. The electrician should be registered with a competent person scheme, or the work notified to building control. On a refit, avoid replacing the fan with a less effective one.

