- Postcode districts
- RM1, RM2, RM3, RM5, RM7, RM11 + 3 more
- Nearby
- Hornchurch, Dagenham and Becontree
- Guide price
- £8,100–£16,250
- Typical time on site
- 6–12 working days
- Water
- Very hard across most of Greater London
- Survey
- Free, at your home
What does a loft bathroom cost in Romford?
In Romford, a loft bathroom typically costs £8,100–£16,250 including VAT, based on London prices. We adjust the national guide for London, where prices are typically about 25% above the UK average. The figure depends on the size of the room, whether anything moves, and the products you pick.
Refit
- Tiling, lighting, extractor fan
Signature
- Walk-in shower under the ridge
New loft bathroom
- New drainage route and water supply
Guide prices for Romford including VAT. Your itemised written quote after the free survey is the price that counts.
Working in Romford
We work right across Romford — RM1, RM2, RM3 and 6 more postcode districts — and in neighbouring Hornchurch and Dagenham.
In Romford, many bathrooms are in flats or converted houses, so we check lease consents, access and the floor below before we price. If your Romford home has a gravity-drained WC on another floor, a macerator in the loft may open up more layout options. If your Romford house has a combi boiler, a loft shower can usually run on mains pressure without a pump.
Supplies across most of Greater London are very hard. If your supply in Romford is the same, limescale on shower glass and heads is a real issue: easy-clean glass, rub-clean nozzles and a squeegee make a big difference. Hardness varies street by street, so check the figure for your postcode with your water supplier.
What the job includes
- A survey of the headroom across the room, with the usable height marked at each fitting position
- Electrics by a qualified electrician, tested and certified, then tiling, testing and handover
- A check of your hot-water system and of the pressure and flow you actually get at loft level
- An extractor fan ducted through the roof or a gable wall, with the duct insulated through cold spaces
Decisions to make first
Gravity or pumped waste
Gravity is silent and maintenance-free. A pumped waste or macerator lets fittings sit away from the stack, provided the house has a WC on gravity drainage elsewhere.
Getting the water pressure
A pumped shower suits a gravity system with a cold tank; an electric shower heats cold mains water at the point of use; a combi or unvented cylinder gives mains pressure throughout.
Rules that apply in England
In England, new drainage and a new connection to the soil stack fall under Part H, a new bathroom needs extract of 15 litres per second intermittent or 8 litres per second continuous under Approved Document F, and new circuits are notifiable under Part P. If the work includes an unvented hot-water cylinder, it must be fitted by a G3-qualified installer.

